Gas Heat Exchanger - for Heat Pumps 12-18 kW
The Nordic Tec BPHE for gas to liquid is designed for use in heat pumps or air conditioners, specifically for operation as an evaporator or condenser in devices with a capacity ranging from 12 to 18 kW.
Technical Details of this gas heat exchanger:
- Material: Stainless Steel 316L, vacuum-brazed with Cu / 99,9% Copper
- Heating Capacity for Heat Pump / Air Conditioner / Refrigeration Unit: 12-18 kW
- Refrigerant / Gaseous Media Connections: ϕ15 - 5/8" for brazing
- Traditional Liquid Media Connections: 1" - DN 25
- Operating Pressure: Up to 45 bar ( maximal allowable pressure)
- Pressure Tests before Commissioning: > 60 bar
- Flow Rate: 12 m3/h
- Connection Method: Counterflow work (for achieving the best performance)
Heat exchange surface area of the Ba-26-70-F heat exchangers for Freon & Gas - 1.82 m²
The graphic comparison places the Nordic Tec Ba-26-70-F freon heat exchanger among the closiest alternative heat exchanger (but only the ones who can afford high pressure systems - and are considered refrigerant heat exchangers). The Ba-26-70-F, which consists of 70 plates and has a plate surface area of 1.82m², is the largest heat exchanger for freon in the series Ba-26-F. In practice, it can work with heat pumps and AC unit up to 18 kW.
The series Ba-26-F is equipped with the connection for brazing - pipe 5/8". If you need a bigger one - you can check the
HE from the series Ba-68-F - which has 7/8".
All the HE from the graph you can find in our catalogue and all of them can be optionally equipped with a thermal insulation as well.
Dimensions:
(A) - 308 mm
(B) - 106 mm
(F) - 175 mm
(C) - 250 mm
(D) - 50 mm
