Freon heat exchanger - 22 kW evaporator
Plate Heat Exchanger for Heat Pumps or Air Conditioners, Suitable for Larger Units in the Range of 15-22 kW
Thermal insulation for the heat exchanger is an optional accessory; you can purchase it without insulation (default version) or with insulation.
The insulation selection menu is located below, just above the price.
Technical details:
- Stainless steel 316L, welded brazed with Cu
- Heating capacity for heat pump / air conditioner / refrigeration unit: 15 kW - 22 kW
- Refrigerant/gas connections: ϕ22 - 7/8" for brazing
- Liquid medium connections: 1" - DN 25
- Operating pressure: up to 45 bar
- Pressure test before commissioning: > 60 bar
- Flow rate: 22 m3/h
- Connection method: counterflow
Heat exchange surface area of the Ba-68-32-F heat exchanger - 2.18 m²
The Ba-68-32 refrigerant-liquid heat exchanger is one of the larger exchangers designed for gas or refrigerant by Nordic Tec in the Ba-68-F (freon) series, positioned in the middle of the series when considering the primary parameter indicating its performance - the active heat exchange surface area. With a surface area of steel plates totaling approximately 2.18 m², it provides excellent support for heat pumps or units operating with refrigerants like R410A, R32, R290, R404, and others. It works exceptionally well with units utilizing refrigerant-to-water heat exchange with a capacity ranging from 15 kW to 22 kW.
The default version of the Ba-68-32-F exchanger is the unit without accessories . However, if you want to improve its performance and add extra protection to the device, you can optionally purchase the refrigerant-liquid exchanger with thermal insulation made of EPP (expanded polypropylene).
Dimensions:
(A) - 526 mm
(B) - 119 mm
(F) - 85 mm
(C) - 470 mm
(D) - 63 mm
