Gas Heat Exchanger - for Heat Pumps 16 kW
The Nordic Tec brazed steel heat exchanger for gas-liquid is designed for use in heat pumps or air conditioners, specifically for operation as an evaporator/condenser in devices with a capacity ranging from 10 to 16 kW.
Technical Details:
- Material: Stainless Steel 316L, vacuum-brazed with Cu
- Heating Capacity for Heat Pump / Air Conditioner / Refrigeration Unit: 10-16 kW
- Refrigerant / Gaseous Media Connections: ϕ15 - 5/8" for brazing
- Traditional Liquid Media Connections: 1" - DN 25
- Operating Pressure: Up to 45 bar ( maximal allowable pressure)
- Pressure Tests before Commissioning: > 60 bar
- Flow Rate: 12 m3/h
- Connection Method: Counterflow
Heat exchange surface area of the Ba-26-60-F heat exchangers for Freon & Gas - 1.56 m²
The graphic comparison places the Nordic Tec Ba-26-60-F freon heat exchanger within the context of the Ba-26-F gas-liquid heat exchanger series. The Ba-26-60-F, which consists of 60 plates and has a plate surface area of 1.56m², is the largest heat exchanger for freon in this series. In practice, it can work with heat pumps and units/air conditioners up to 16 kW.
If you need a freon-water (or freon-water/glycol) heat exchanger for a larger unit, meaning one with a larger plate surface area, you can also find it in our catalog. Look for it in the second series of gas heat exchangers, the Ba-68F series. These heat exchangers are based on larger plates and have larger connections for the refrigerant (7/8"). The largest freon heat exchangers in our store have a surface area of approximately 4m².
This freon heat exchanger can be used as well for converting AC to a heat pump.
Dimensions:
(A) - 308 mm
(B) - 106 mm
(F) - 152 mm
(C) - 250 mm
(D) - 50 mm
