Gas Liquid Heat Exchanger Nordic Tec Ba-26-70-F 1,82m²
Refrigerant to Liquid Heat Exchanger Nordic Tec Ba-26-70-F 1,8m² with insulation
Gas Liquid Heat Exchanger Nordic Tec Ba-26-70-F 1,82m²
Refrigerant to Liquid Heat Exchanger Nordic Tec Ba-26-70-F 1,8m² with insulation

Gas Liquid Heat Exchanger Nordic Tec Ba-26-70-F 1,82m²

Freon Heat Exchanger - 70-Plate Ba-26-70-F for Refrigerant

A 70-plate refrigerant heat exchanger for gas to water media, designed for high-pressure applications (< 45 bar). It is suitable for use with liquids (on the 1st channel - so called receiving side) and refrigerant/gas (the 2nd side). The heat exchanger Ba-26-70-F can be an excellent condenser or evaporator for heat pumps or AC systems, even when converting an AC into a home heat pump. It performs excellently with practically all refrigerants in systems not exceeding 4.5 MPa.

  • Number of plates: 70 plates
  • Connections - Gas side: 5/8" tube (φ15) | Liquid side (heat receiver side): 1"
  • Heat exchange surface area: 1.820 m²
  • Estimated heat pump / unit / air conditioner capacity: 12 - 18 kW
  • Working pressure on the gas side: up to 4.5 MPa | 45 bar

The 70-plate refrigerant heat exchanger is optionally available with insulation as well.

☑️ Delivery possible in every European destination
✅ Free delivery in: FR, IT, ES, DE, PL, SI, AT, DK, NL, BE, CZ, LV, EE, LT

Reference: EU-Ba-26-70-F
Condition New
Accessories for PHE
  • Exchanger only (without accesories)
  • With Thermal Insulation
On stock
€364.99
VAT included

 

Gas Heat Exchanger - for Heat Pumps 12-18 kW

The Nordic Tec BPHE for gas to liquid is designed for use in heat pumps or air conditioners, specifically for operation as an evaporator or condenser in devices with a capacity ranging from 12 to 18 kW.

Technical Details of this gas heat exchanger:

  • Material: Stainless Steel 316L, vacuum-brazed with Cu / 99,9% Copper
  • Heating Capacity for Heat Pump / Air Conditioner / Refrigeration Unit: 12-18 kW
  • Refrigerant / Gaseous Media Connections: ϕ15 - 5/8" for brazing
  • Traditional Liquid Media Connections: 1" - DN 25
  • Operating Pressure: Up to 45 bar ( maximal allowable pressure)
  • Pressure Tests before Commissioning: > 60 bar
  • Flow Rate: 12 m3/h
  • Connection Method: Counterflow work (for achieving the best performance)


Heat exchange surface area of the Ba-26-70-F heat exchangers for Freon & Gas - 1.82 m²

Heat Exchange Surface Area for Ba-26-70-F R290 R32

The graphic comparison places the Nordic Tec Ba-26-70-F freon heat exchanger among the closiest alternative heat exchanger (but only the ones who can afford high pressure systems - and are considered refrigerant heat exchangers). The Ba-26-70-F, which consists of 70 plates and has a plate surface area of 1.82m², is the largest heat exchanger for freon in the series Ba-26-F. In practice, it can work with heat pumps and AC unit up to 18 kW.

The series Ba-26-F is equipped with the connection for brazing - pipe 5/8". If you need a bigger one - you can check the HE from the series Ba-68-F - which has 7/8".
All the HE from the graph you can find in our catalogue and all of them can be optionally equipped with a thermal insulation as well.


Dimensions:
Gas HEat Exchanger Dimensions Ba-26-70
(A) - 308 mm
(B) - 106 mm
(F) - 175 mm
(C) - 250 mm
(D) - 50 mm

EU-Ba-26-70-F
33 Items
New
No reviews

You might also like

copy of Soldering Nipple Adapter for Heat Exchanger: 5/8" Pipe | 5/8" SAE copy of Soldering Nipple Adapter for Heat Exchanger: 5/8" Pipe | 5/8" SAE 2
On stock
Adapters-Solder Nippels - Pipe 5/8" to SAE Thread

Soldering Nipple Adapter for Heat Exchanger: 5/8" Pipe | 5/8" SAE

Solder-nipple-5/8"-to-SAE-5/8
€17.40
Nipple for soldering into a 5/8" pipe with an adapter to a 5/8" SAE threaded connection Nipple for a 5/8" pipe – adapter to a 5/8" SAE standard threaded connection. The price applies to one piece of the nipple.Nipple specifications: Pipe size for soldering: 5/8" Thread size on the SAE side: 5/8" Material: Brass CW617N The 5/8" | 5/8" SAE nipple fits...
Cookie consent