Gas Heat Exchanger - for Heat Pumps 13 kW
Nordic Tec plate heat exchanger for freon or refrigerant - for use in heat pumps or air conditioners, suitable for operation as an evaporator/condenser in devices within the range of 8-13 kW.
Technical Details:
- Material: Stainless Steel 316L, vacuum-brazed with Cu
- Heating Capacity for Heat Pump / Air Conditioner / Refrigeration Unit: 8 kW - 13 kW
- Refrigerant / Gaseous Media Connections: ϕ15 - 5/8" for brazing
- Traditional Liquid Media Connections: 1" - DN 25
- Operating Pressure: Up to 45 bar ( maximal allowable pressure)
- Pressure Tests before Commissioning: > 60 bar
- Flow Rate: 12 m3/h
- Connection Method: Counterflow
Heat exchange surface area of the Ba-26-50-F heat exchangers for Freon & Gas - 1.30 m²
The graphic representation above illustrates a series of heat exchangers for gas/freon/refrigerant - the Ba-26-F Nordic Tec series, and the placement of the Ba-26-50-F model within this series. As seen in the attached graph, this heat exchanger has a plate surface area of 1.3m², which, in practice, makes it well-suited for servicing heat pumps and units ranging from 8 to 13 kW, depending on the parameters used, primarily temperature. If you are looking for a freon heat exchanger with similar dimensions but capable of handling larger heat pumps, also adapted for working with refrigerant, you can explore a larger heat exchanger in this series, namely the Ba-26-60-F with a surface area of 1.56m².
Dimensions:
(A) - 308 mm
(B) - 106 mm
(F) - 133 mm
(C) - 250 mm
(D) - 50 mm
