Catalogue

Additional Stainless Steel Drainage Channel 1m | NORDIC TEC Additional Stainless Steel Drainage Channel 1m | NORDIC TEC 2
On stock
Drain channels Drainage Systems

Additional Stainless Steel Drainage Channel 1m | NORDIC TEC

Drain-channel-1m
€62.50
1-Meter Extension Arm - Garage Drainage Channel Linear drainage channel-arm for by Nordic Tec, 100 cm in length Designed to withstand high loads, including vehicle and forklift pressure Includes components for end capping and/or connecting channels ☑️ The garage drain extension arm is not a standalone product – it is an accessory for Nordic Tec garage...
Mixing pump group UFH Nordic Tec GPN-180-3DR Mixing pump group UFH Nordic Tec GPN-180-3DR 2
On stock
Pump groups & Pump stations

Mixing pump group UFH or radiators | Nordic Tec GPN-180mm-3DR

UFH-pump-group-GPN-180-3DR
€128.50
Mixing Pump Group for Underfloor Heating and radiators| Nordic Tec with 3-Way Valve GPN-3DR A complete and pre-assembled pump mixing group for underfloor heating, ready for installation – includes all parts visible in the photos. The mixing pump group features a 3-way valve – optionally available with a 10 Nm 230V actuator. Recommended for both radiators...
Soldering Nipple Adapter for Heat Exchanger: 7/8" Pipe | 3/8" SAE Soldering Nipple Adapter for Heat Exchanger: 7/8" Pipe | 3/8" SAE 2
On stock
Adapters-Solder Nippels - Pipe 7/8" to SAE Thread

Soldering Nipple Adapter for Heat Exchanger: 7/8" Pipe | 3/8" SAE

Solder-nipple-7/8"-to-SAE-3/8
€17.90
Soldering nipple for a 7/8" pipe with a 3/8" SAE threaded connection Nipple for a 7/8" pipe with a 3/8" SAE threaded connection. The price applies to one piece of the 7/8" x 3/8" SAE nipple.Nipple specifications: Pipe size for soldering: 7/8" Thread size on the SAE side: 3/8" Material: Brass CW617N The 7/8" to 3/8" SAE nipple is compatible with Nordic...
Soldering Nipple Adapter for Heat Exchanger: 5/8" Pipe | 3/8" SAE Soldering Nipple Adapter for Heat Exchanger: 5/8" Pipe | 3/8" SAE 2
On stock
Adapters-Solder Nippels - Pipe 5/8" to SAE Thread

Soldering Nipple Adapter for Heat Exchanger: 5/8" Pipe | 3/8" SAE

Solder-nipple-5/8"-to-SAE-3/8
€16.40
Soldering Nipple for Steel or Copper Pipe: 5/8" to 3/8" SAE Nipple for reducing a 5/8" pipe to a 3/8" SAE threaded connection. The price refers to 1 piece of the nipple.Specifications: Tube size for soldering: 5/8" SAE threaded connection size: 3/8" Nipple materiał: CW617N-Brass This product is compatible with refrigerant heat exchangers from the Nordic...
Thermal Insulation for Gas-Liquid PHE - IZ-Ba-68-20/26/32 Thermal Insulation for Gas-Liquid PHE - IZ-Ba-68-20/26/32 2
On stock
Plate Heat Exchanger Accesories

Thermal Insulation for Gas-Liquid PHE - IZ-Ba-68-20/26/32

EU-PHE-IZ-Ba-68-20/26/32
€49.99
Plate heat exchanger Insulation Box IZ-Ba-68-10/16 Material: Polipropylen Dedicated for NORDIC Tec Freon Heat Exchangers: Refrigerant - Freon Heat Exchanger Nordic Tec Ba-68-20 1" - 7/8" - 20 plates Refrigerant - Freon Heat Exchanger Nordic Tec Ba-68-26 1" - 7/8" - 26 plates Refrigerant - Freon Heat Exchanger Nordic Tec Ba-68-32 1" - 7/8" - 32 plates
Classic Heating Manifold UFH Manifold NORDIC TEC 3 zones 3 ports Classic Heating Manifold UFH Manifold NORDIC TEC 3 zones 3 ports 2
On stock
Central Heating Manifolds - Underfloor Heating Manifold

Central Heating Manifold UFH Manifold NORDIC TEC 3 zones

EU-RD-CO-3-s
€67.99
Classic Heat Manifold by Nordic Tec - 3 zones Material of the manifold - MS Brass Flow meters for each zones are included Tap valves for each circuit are included Air vent for each beam is a prt of the manifold set Drain valve for each beam is included Operation pressure of the UFH System / Test pressure < 6/10 bar UFH zones connection - BSP 3/4",...
Underfloor Heating Manifold...
On stock
Central Heating Manifolds - Underfloor Heating Manifold

Underfloor Heating Manifold Angled Valve NORDIC TEC 3 ports

RD-CO-3-zaw-kat-eu
€105.99
UFH Manifold with angled valves Nordic Tec - 3 circuits Material - MS Brass Operation pressure / Test pressure <6/10 bar Circle connection for Pex - BSP 3/4" Optionally with fittings Eurokonus 3/4 x 16mm Ball valves dimenions - BSP 1" Including all the elements as on the photoes. We deliver our goods in every country in Europe in relatively quick...
Floor Heating System Manidold Flowmeters 3 sections
On stock
Central Heating Manifolds - Underfloor Heating Manifold

Underfloor Heating Manifold UFH Manifold NORDIC TEC 3 circuits

RD-CO-3
€95.99
Central Heating Manifold Fully Equiped - 3 circuits Material - MS Brass Work pressure/Test pressure <6/10 bar Circle connection for Pex - BSP 3/4" Optionally with fittings Eurokonus 3/4x16mm Ball valves dimenions - BSP 1" Including all the elements as on the photoes. The photoes have a commercial character, the unit from this offer has 3 circuits. The...
Flanged heat exchanger 94 plates, 2.5" flange connections Nordic Tec Fa-210-94 Flanged heat exchanger 94 plates, 2.5" flange connections Nordic Tec Fa-210-94 2
  • New
On stock
Flanged Plate Heat Exchangers

Flanged Plate Heat Exchanger 94 plates, 2.5" flanges Nordic Tec Fa-210-94

NT-flanged-heat-exchanger-Fa-210-94
€3,758.00
Plate heat exchanger Fa-210-94 with DN65 flanges Nordic Tec heat exchanger with 94 plates and DN65 flange connections. Details below: Flanges: 2.5" PN16 - DN65 according to EN 1092-1, type 01 – installation without reducers or threaded adapters 94 steel plates - stainless steel S316 Heat transfer area: 19.74 m² Nominal flow rate: 120 m³/h Support legs -...
View
drainage channel for Concrete 5m drainage channel for Concrete 5m 2
On stock
Drain channels Drainage Systems

INOX drainage channel for Concrete Slot drain 6m-5m-4m-3m-2m Length Selection

Drainage-channel-for-Concrete-Length-Selection
€346.99
Drainage channel for Concrete 5m-4m-3m-2m with Length Choice | Nordic Tec INOX The INOX drainage channel - or linear garage slot drain for concrete floor, from this offer, is a drainage system containing 6, 5, 4, 3, or 2 arms - meaning there is a choice of variants available. Every arm is a separate module channel with the length of 1 aditional meter....
Direct pump group UFH | Nordic Tec GPN-180mm-3DR Direct pump group UFH | Nordic Tec GPN-180mm-3DR 2
On stock
Pump groups & Pump stations

Direct pump group UFH or radiators | Nordic Tec GPN-180mm

Pump-group-GPN-180
€107.99
Pump Group for Underfloor Heating | Nordic Tec with Direct Circulation (No Mixing) The GPN pump group for underfloor heating in the non-mixing variant is fully ready for installation. This is a pump group without mixing valves, designed for small and medium heating systems – ideal for single-family homes. Thanks to the integrated check valve, it prevents...
Soldering Nipple Adapter for Heat Exchanger: 7/8" Pipe | 3/8" SAE Soldering Nipple Adapter for Heat Exchanger: 7/8" Pipe | 3/8" SAE 2
On stock
Adapters-Solder Nippels - Pipe 7/8" to SAE Thread

Soldering Nipple Adapter for Heat Exchanger: 7/8" Pipe | 1/2" SAE

Solder-nipple-7/8"-to-SAE-1/2
€18.40
Soldering nipple for a 7/8" pipe with a 1/2" SAE threaded connection Nipple for a 7/8" pipe with a 1/2" SAE threaded connection. The price applies to one piece of the 7/8" x 1/2" SAE nipple.Nipple specifications: Pipe size for soldering: 7/8" Thread size on the SAE side: 1/2" Material: Brass CW617N The 7/8" to 1/2" SAE nipple is compatible with Nordic...
Soldering Nipple Adapter for Heat Exchanger: 5/8" Pipe | 1/2" SAE Soldering Nipple Adapter for Heat Exchanger: 5/8" Pipe | 1/2" SAE 2
On stock
Adapters-Solder Nippels - Pipe 5/8" to SAE Thread

Soldering Nipple Adapter for Heat Exchanger: 5/8" Pipe | 1/2" SAE

Solder-nipple-5/8"-to-SAE-1/2
€16.90
Nipple for soldering into a 5/8" pipe with an adapter to a 1/2" SAE threaded connection Nipple for reducing a 5/8" pipe with an adapter to a 1/2" SAE standard threaded connection. The price applies to one piece of brass nipple.Nipple specifications: Pipe size for soldering: 5/8" Thread size on the SAE side: 1/2" Nipple materiał: CW617N-Brass The adapter...
Central Heating Manifold UFH Manifold NORDIC TEC 4 zones nt Central Heating Manifold UFH Manifold NORDIC TEC 4 zones nt 2
On stock
Central Heating Manifolds - Underfloor Heating Manifold

Central Heating Manifold UFH Manifold NORDIC TEC 4 zones

EU-RD-CO-4-s
€77.99
Classic Heat Manifold by Nordic Tec - 4 zones Material of the manifold - MS Brass Flow meters for each zones are included Tap valves for each circuit are included Air vent for each beam is a prt of the manifold set Drain valve for each beam is included Operation pressure of the UFH System / Test pressure < 6/10 bar UFH zones connection - BSP 3/4",...

Catalogue

Cookie consent