Hydraulic Low Loss Header - manifold set 3 sections - without valves fittings
Low Loss Header-Hydraulic Manifold 3 circuits for 3 pumps Nordic Tec
Hydraulic Low Loss Header - manifold set 3 sections - without valves fittings
Low Loss Header-Hydraulic Manifold 3 circuits for 3 pumps Nordic Tec

Low Loss Header-Hydraulic Manifold 3 circuits for 3 pumps

Hydraulic Low Loss Header - manifold set 3 sections - without valves/fittings

Low Loss Header - manifold for heating systems mounted on a wall-mounted plate 67x50cm, prepared for 3 circulation pumps type 180mm

The Low Loss Header - manifold set with 3 heating sections will perform better than a classic Low Loss Header for heating systems or a standard manifold - because its components - the Low Loss Header and manifold work synergistically. The 3-section manifold extends the pressure-neutral zone.

This is a variant without fittings and valves - our store also offers a version with fittings/valves.

Plate size with mounted Low Loss Header, manifold sections and all set components - 67 x 50 cm

☑️ This Low Loss Header-manifold set offers the fastest installation of this type of solution on the market
✅ Free shipping to 14 European countries

Reference: NT-SCZ-3ob-b-z
Condition New
On stock
€269.99
VAT included

 

Techniczal parameters - Hydraulic Low Loss Header - manifold set 3 circuits

  • The Low Loss Header - manifold is mounted on a rectangular plate for quick installation
  • Supply and heat distribution sections have 1" thread - in this variant without fittings
  • Low Loss Header capacity - max. 70 kW (delta = 15K), total capacity of the set with 3-section manifold - 85 kW
  • Drain valve and automatic air vent included with the Low Loss Header (visible in photos) - included in the price
  • Thread size for Low Loss Header accessories (air vent and drain valve mentioned above) is 1/2" female
  • Maximum flow rate for optimal Low Loss Header performance - 6 m3/h
  • Maximum safe operating temperature for heating system < 100°C
  • Permissible glycol use - up to 50% concentration
  • Low Loss Header and hydraulic manifold chambers made of galvanized stainless steel
  • Complete Low Loss Header-manifold set with plate - powder-coated matte black
  • Manifold designed for 3 circulation pumps 180 mm (e.g. 25-40 180, 25-60 180, 25-80 180 etc.)
  • Set includes 4 sturdy wall mounting anchors (8cm length)
NT-SCZ-3ob-b-z
14 Items
New
No reviews

You might also like

Hydraulic Separator Nordic Tec with 3 heating cirlces manifold thermometers Hydraulic Separator Nordic Tec with 3 heating cirlces manifold thermometers 2
On stock
Low Loss Headers - Hydraulic Separators

Low Loss Header - Manifold 3 with Thermometer & Manometer (for 130mm-Pump)

SNT-BL-3
€314.99
Nordic Tec LOW LOSS HEADER Hydraulic Separation - Manifold 3 circuits with temperature and pressure control ✅ The set for pumps of 130mm The steel hydraulic sepration system - Low loss header combined with the flow distibutor - 3 circuit manifold. The system gives better possibilities than a traditional hydraulic separators or separation systems. The...
Low Loss Header-Hydraulic Manifold 2 circuits for 2 pumps Low Loss Header-Hydraulic Manifold 2 circuits for 2 pumps 2
On stock
Low Loss Headers - Hydraulic Separators

Low Loss Header-Hydraulic Manifold 2 circuits for 2 pumps

NT-SCZ-2ob-b-z
€214.99
Hydraulic separator-Low Loss Header set for heating systems – for 2 circulation pumps Hydraulic separator, low loss header with distributor of circuits for heating systems – mounted on a plate with provisions for 2 circulation pumps (180mm). This set, consisting of a hydraulic separator-distributor for 2 circuits (for 2 pumps) (+ supply piping), ensures...
Cookie consent