Plate Heat Exchanger NORDIC Ba-115-160 2.5" 5900kW

Industrial Plate Heat Exchanger Nordic Tec Ba-115-160 - 4x 2 1/2", 160 Plates

Large industrial plate heat exchanger with 160 plates and a heat exchange surface of 18.40 m²

Brazed 160-plate heat exchanger Nordic Tec Ba-115-160 – for industrial heating and cooling systems, with a large heat transfer surface and a 2.5-inch connection.

Technical data - industrial plate heat exchanger Nordic Tec Ba-115-160

• Plate material: stainless steel L316
• Brazing material: copper (99.99%)
• Plates: stainless steel - each plate 0.4 mm thick
• Temperature range: -185°C to +230°C
• Flow rate: 45 m³/h
• Operating pressure: 30 bar (tested at 45-60 bar)
• Connection diameter: 2.5 inches | 2 1/2"

Heat exchanger Ba-115-160 - large heat transfer surface: 18.40 m²

The heat transfer surface of a heat exchanger is one of the most important factors influencing its efficiency. It is precisely on this surface that thermal energy is transferred between two media – for example, between heating water and domestic hot water. The larger the heat transfer surface, the more efficiently the heat exchanger can transfer heat, allowing for better utilization of the available energy.

In practice, this is achieved through the use of suitable materials and the design of the plate structure to maximize contact between the media. The term contact should be understood symbolically, as the media in a heat exchanger must not mix.

In the Ba-115-160 model, the total plate surface area is 18.40 m².

Dimensions - heat exchanger Ba-115-160

A - 535 mm
B - 253 mm
C - 456 mm
D - 174 mm
F - 405 mm