Low Loss Headers - Hydraulic Separators
Low Loss Header-Separator with 2-circuit-Manifold 2 + Thermometer & Manometer (130mm)
- New
Stainless Steel Drain Drainage for Garage Basement Carpark | NORDIC TEC Set with 2 arms
Stainless steel drainage channel | Industrial drain for garages, basements, carparks, warehouses
Garage or basement Drainage Kit for Concrete, Resin or Paver Floors – Linear Drain for Garage, Warehouse and similar Use
This Stainless Steel drainage channel or just garage drain kit includes the main drainage component – i.e. a drain grate with water outlet – along with 2 extension arms (stainless steel channels). Details below:
- Industrial garage drain made of high-grade stainless steel
- Suitable for indoor or outdoor use
- Drainage system is resistant to mechanical pressure (suitable for driving and parking vehicles on it), making it ideal for use in garages, driveways or carparks
- Water outlet end caps for drainacge channels are included in the kit
- The basic set includes 2 stainless steel channels-arms (each 100 cm long) + the central drain grate – total length: 235 cm
- Drainage main part with a sediment trap included to block debris
- The whole drainage system can be extended with additional 1-meter channels-arms available in our store
- DN50 water outlet
- ✅ The linear garage drain kit is complete – no additional parts need to be purchased
☑️ Fast availability and good quality of stainless system drainage systems for warehouses, basements, garages and industrial facilities
✅ Delivery available to any European country with low-cost or free shipping
Reference: Drain-Garage-SET-1
Condition
Stainless steel drain grating | Complete Kit for basement or garage drainage system
Slot-style linear drainage system designed for basement or garage use – but in fact suitable for any area, including those with vehicle traffic. It can therefore be installed not only in garages or basement, but also in warehouses, industrial halls, driveways, carparks and parking areas, workplaces, or swimming facilities. The stainless steel drain grating offered here is a complete system, which includes all the elements needed for installation in your basement. Suitable for both indoor and outdoor use.
Garage drainage channels with an aesthetic finish by NORDIC TEC
This garage drainage system, including channels, is made of pure stainless steel and does not have a purely industrial look, so it does not detract from the appearance of its surroundings. Despite its suitability for industrial applications, the Nordic Tec slot drain kit features a highly aesthetic design, with the option to fill the cover with tiles, resin, or other floor finishes.
In fact, in many cases, it can even enhance the raw look of a garage or warehouse floor by adding a touch of visual interest.
Basement floor drainage system – What channel length can be achieved if we got a big cellar or warehouse?
Since this basement floor drainage system is primarily designed for use in garages, cellars or warehouses, it is built in a modular way. This means that although the standard kit includes 2 extension arms (stainless steel channels which you can see on the drainage photoes), each 1 meter long, the system can easily be extended with additional arms, which are available separately in our offer. In this way, even if the linear drain is to be installed in a large cellar, garage or hangar, it will perform its function – as there are essentially no limitations in terms of length, if if got a large floor.
You can connect not only additional drain arms but also multiple drainage system kits – for example, 2 or 3 sets – to create multiple drainage points located in different parts of the cellar, garage or warehouse - which are connected with steel channels. In principle, there are no restrictions, and you can design your own floor drainage system according to your needs.
It is also possible to install the extension channles on only one side of the main drain, simply capping off the other end. We would like to remind you that this garage linear drain set is complete and includes all necessary end caps and seals – no additional parts are needed.
Industrial drainage – The Core Element: The Trap
As mentioned, the Nordic Tec industrial drainage system is fully equipped, including a trap with a sediment catcher designed to retain dirt such as mud or leaves (especially useful if the drain is installed outdoors on a parking area). This ensures that debris does not enter the drainage pipe and cause blockages.
The central square section of the industrial drainage system features a removable cover that can be filled with tiles or resin, or simply left as-is – with a clean stainless steel surface exposed.
Warehouse drainage - Cleaning
The cover – also known as the grate of the warehouse drainage – is very easy to remove and requires virtually no tools. Once the drainage cover is lifted, accumulated waste and debris can be quickly cleared out, restoring full water drainage functionality. Cleaning the trap of this type of drain is very fast and usually takes no more than 2–3 minutes.
It’s worth mentioning that the solution adopted by Nordic Tec is designed to prevent any odors from escaping the drainage pipe, and to avoid backflow – particularly important when the drain is installed indoors, such as in a garage, warehouse or a workplace.
Carpark drain – The Extension channels are an essential parts too
As previously mentioned, the basic set includes two stainless steel channels-arms - along with all necessary seals and fittings for connecting or capping the ends, if no extension is planned. This makes the length of the carpark drain virtually unlimited, and the system is often used even in large hangars, garages or warehouses.
✅ ☑️ Don’t forget – in our offer, you’ll also find carpark drain extension arms available for purchase individually, in any quantity you need.
200 Items
No reviews
You might also like