Plate Heat Exchanger with wall-mounitng kit - Ba-60-90 NORDIC TEC
Plate Heat Exchanger NORDIC Ba-60-90 1 1/2" 990kW insulation
Plate Heat Exchanger for a Heat Pump - Ba-60-90
Plate Heat Exchanger FULL KIT Ba-60-90 NORDIC TEC
wall-mount kit for Heat Exchanger for heat pumps ba-60-90
Plate Heat Exchanger with wall-mounitng kit - Ba-60-90 NORDIC TEC
Plate Heat Exchanger NORDIC Ba-60-90 1 1/2" 990kW insulation
Plate Heat Exchanger for a Heat Pump - Ba-60-90
Plate Heat Exchanger FULL KIT Ba-60-90 NORDIC TEC
wall-mount kit for Heat Exchanger for heat pumps ba-60-90

Plate Heat Exchanger NORDIC Ba-60-90 1 1/2" 990kW

Plate Heat Exchanger NORDIC TEC Ba-60-90

Large 90-plate heat exchanger with a 1 1/2" (6/4") connection, available with an optional mounting bracket with unions (also 6/4" size) and thermal insulation.

  • Plate Q'ty: 90 pcs.
  • Connections: 1 1/2" BSP
  • Heat Exchange Area: 5.400m²

The 90-plate brazed steel heat exchanger is a proven plate heat exchanger for heat pumps. Thanks to its large heat exchange surface of approximately 5.40 m², it is particularly well-suited for efficient heat transfer in large heat pump systems.

Moreover, the Ba-60-90 heat exchanger is versatile and compatible with conventional heating systems. It is also ideal for connecting heat sources to large-scale buildings such as hotels or shopping centers.

☑️ Quick delivery of our large plate heat exchangers - in most European countries
✅ Free shipment in the following countries: DE, PL, FR, ES, IT, AT, NL, BE, DK, CZ, LT, LV, SI, EE

Reference: NT Ba-60-90
Condition New
Accessories for PHE
  • Exchanger only (without accesories)
  • with Wall-Mounting+Fittings
  • With Thermal Insulation
  • Full Set (with Insulation&Wall-mounting with Fittings)
On stock
€679.99
VAT included

 

Heat Exchanger Nordic Tec Ba-60-90  - 4x 1 1/2", 90 plates

Plate heat exchanger for connecting heat pumps or traditional heating boilers ba-60-90

Plate heat exchanger accessories on the photo - insulation and mounting accessories are optional

Technical details - Heat Exchanger Nordic Tec Ba-60-90

- Stainless Steel S316L, brazed with 99,9% Cu

- Connections: 4x 6/4", BSP

- Working Pressure - <30 bar

- Test Pressure - 45-60 bar

- Max. temperature +230°C

- Flowrate - 22 m³/h

Heat Exchange Surface - 5.400 m²

Heat Exchanger Nordic Tec Ba-60-90 - 4x 1 1/2", 90 plates

The Ba-60-90 heat exchanger has a very large surface area of 5.4 m², making it one of the largest exchangers in the Nordic Tec Ba-60 series. The large surface area of the plates and the relatively large connections make this exchanger particularly suitable for managing large heating systems and large-scale heating equipment. It is often used for connecting monoblock heat pumps. In a glycol-water system, the Ba-60-90 heat exchanger can handle monoblock heat pumps with a power range between 18 and 38 kW, while in a water-water system (for separating split heat pump circuits), it can support units up to 45 kW.

Main Applications of the Ba-60-90 PHE

  • Large central heating systems (CH) and/or domestic hot water (DHW) – large-scale heating systems
  • Heat exchanger for managing large heat pumps (liquid-liquid connections, for separating the heat pump circuit from the installation)
  • Particularly suitable for separating glycol-based monoblock heat pumps from the rest of the system
  • Industrial refrigeration
  • Managing large industrial buildings in connection with district heating networks


Dimensions:
Plate heat exchanger nordic tec ba-60-90
(A) - 526 mm
(B) - 124 mm
(F) - 225 mm
(C) - 478 mm
(D) - 73 mm


In DOWNLOAD section you get the data sheet of the unit.

_____________________

A 90-plate brazed heat exchanger for water heating - Nordic Tec Ba-60-90

Nordic Tec offers optional thermal insulation for this heat exchanger, approximately 24mm thick, made of polypropylene foam. This model features 6/4 inch connections, providing it with higher flow capacity. The nominal flow rate for this heat exchanger is 22m3/h, but it's essential to note that a 1 1/2 inch pipe ensures a maximum flow rate of approximately 15.50 m3/h.

This heat exchanger is frequently chosen for use in industrial or commercial facilities, such as central heating and hot water systems in office buildings, hotels, restaurants, warehouses, large retail stores, schools, and even churches.

The device is constructed by a proven method of joining steel plates. Each plate of this heat exchanger has a heat exchange surface of 0.060m². When you multiply this value by the number of plates (in this case, 90), you obtain an impressive heat transfer surface area of 5.40m².

Plate Heat Exchanger for Hot Water - Nordic Tec Ba-60-90

Additionally, it can be used as a hot water plate heat exchanger in complex and large-scale systems.

It is important to note that the Ba-60-90 heat exchanger with 90 plates is recommended for use with heat pumps, especially as an internal heat exchanger for handling refrigerants, gases, etc. This heat exchanger is designed to withstand pressures up to 30 bar and is used to connect heat pumps to heating systems in liquid-liquid configurations. This is particularly relevant for connecting monoblock heat pumps in water/glycol systems.

Heat Exchanger for Large 40 kW Monoblock Heat Pumps

The Nordic Tec Ba-60-90 heat exchanger is particularly suitable for use with large monoblock heat pumps, thanks to its large heat transfer surface and sizable connections, which allow for relatively high flow rates with minimal pressure drops. The selection of the heat exchanger for each heat pump depends mainly on the flow temperature of the specific system. Larger models are chosen for low-temperature systems, such as underfloor heating with temperatures of 30-35°C, while smaller heat exchangers are selected for systems with temperatures around 50°C.

Operation of the Ba-60-90 Heat Exchanger with Glycol-Based Monoblock Heat Pumps

  • In the case of a monoblock heat pump using glycol (30%) in a low-temperature system (30-35°C), the Ba-60-90 heat exchanger can handle units with a capacity of up to 18-20 kW.
  • In a high-temperature system (around 50°C) with the same pump, this heat exchanger can support units with a capacity of up to 36 kW and, in some cases, up to 40 kW

The selection of a heat exchanger for large monoblock heat pumps should, however, consider all aspects of the specific system and be made on an individual basis.

133 Items
New
No reviews

You might also like

Customers who bought this product also bought:

underfloor heating systems with 4 circles
On stock
Central Heating Manifolds - Underfloor Heating Manifold

Underfloor Heating Manifold UFH Manifold NORDIC TEC 4 circuits

PL-RD-CO-4
€105.99
Central Heating Manifold Fully Equiped - 4 circuits Material - MS Brass Work pressure/Test pressure <6/10 bar Circle connection for Pex - BSP 3/4" Optionally with fittings Eurokonus 3/4x16mm Ball valves dimenions - BSP 1" Including all the elements as on the photoes. Experience reliable and efficient underfloor heating with the Nordic Tec 4-circuit UFH...
Fördelare för golvvärme 10 kretsar Nordic Tec
On stock
Central Heating Manifolds - Underfloor Heating Manifold

Underfloor Heating Manifold UFH Manifold NORDIC TEC 10 circuits

RD-CO-10
€176.99
Central Heating Manifold Fully Equiped - 10 circuits Material - MS BrassWork pressure/Test pressure <6/10 barCircle connection for Pex - BSP 3/4"Optionally with fittings Eurokonus 3/4x16mm Ball valves dimenions - BSP 1" Including all the elements as on the photoes. Order from the official producer's e-shop - We deliver our Heating Manifolds...
Product added to wishlist
Cookie consent