Connecting a Fireplace to a Sealed System via a Plate Heat Exchanger

✅ Connecting a fireplace to a closed system via a heat exchanger

Leaving the fireplace in an open vented system and connecting it to a sealed system (closed system) via a heat exchanger is a solution that is gaining popularity, especially for those who want to enjoy a water-jacket fireplace while also opting for a more modern closed heating system, such as underfloor heating.

It combines high efficiency, safety, and user comfort. It also provides additional benefits in terms of stabilizing system pressure, which eliminates the need for a hydraulic separator. Modern fireplaces increasingly serve as the central element of a home heating system, and their connection to a closed system is becoming a standard solution. Such an installation not only improves energy efficiency but also reduces the risk of overheating or system failure.

This article provides all the practical knowledge you need if you are considering connecting a water-jacket fireplace via a heat exchanger. To fully understand the article, it is helpful to learn about the difference between closed and open systems in heating.

• ☑️ BLOG: What is the difference between sealed (closed) and open heating systems?
  

The role of the heat exchanger in connecting a fireplace

The key component in this process is the heat exchanger. It is responsible for safely transferring thermal energy from the fireplace (which remains in an open system with an expansion vessel for safety) to other components of the heating system. This ensures that, without the risk of damaging safety valves and the like, the open vessel guarantees the fireplace’s safety against system overheating. The system remains stable and operates without disruptions. This solution is especially appreciated by those for whom heating safety is a priority.

Introduction to the topic

Installing a water-jacket fireplace in an open system and connecting it to a closed system creates an ideal blend of traditional charm and modern technology. Such heating systems are becoming increasingly popular, often serving as the primary source of heat in homes. Notably, integrating the fireplace into a closed system via a heat exchanger not only enhances energy efficiency but also significantly improves safety. This reduces the risk of overheating or system failure to a minimum.

Why connect a fireplace in an open system?

Open fireplace systems allow for natural water and air circulation, translating into higher efficiency for the entire heating system. However, the fireplace, as a relatively simple and inert heat source, cannot regulate itself based on temperature sensors (unlike heat pumps or gas boilers). This can lead to system overheating in the event of installation or design errors. Installing the fireplace in an open system, which includes an overflow vessel, ensures that such situations are avoided. It is the best-known method for pressure control.

The crucial element of this solution is a plate heat exchanger, which separates the open fireplace system from the closed central heating system. This design avoids overheating, making the installation more reliable and safer, while also enabling heat transfer to the receiving system, which can operate in a closed system. Keeping the receiving system closed will result in slower aging and less efficiency loss. This also allows for the installation of a low-temperature and currently popular heating form — underfloor heating — which should only operate in closed, pressurized systems.

Plate Heat Exchanger NORDIC Ba-12-30 3/4" 65kW

NT Ba-12-30

74,99 €

In den Warenkorb

Odpływ liniowy AZTEK 60cm

NT Ba-12-50

104,99 €

In den Warenkorb

t

SCZ-2ob

249,99 €

In den Warenkorb

The role of a heat exchanger in a heating system

A heat exchanger is a key component of a heating system, enabling efficient energy transfer between an open fireplace system and a closed central heating system. Its importance cannot be overstated because:

• It ensures a stable and safe connection between the two systems.
• Without it, connecting the two systems (without mixing them) is technically impossible.
• It optimizes heat transfer by shortening pump circuits (acting as a hydraulic separator for the central heating system).

As shown, connecting a fireplace to a closed system via a heat exchanger has additional advantages, as it naturally balances pressures within the system. This side effect often plays a decisive role in the efficiency of heating.

Water fireplaces or fireplace inserts – the basics

A water fireplace or just water fireplace insert combines traditional charm with modern central heating technology. Thanks to the water jacket, the heat generated during wood combustion is not confined to a single room. Instead, it is directed into the heating system, warming the entire house. This solution allows for the maximum utilization of thermal energy, which is of great importance in times of rising energy costs. If you're considering a fireplace, a water-jacket version is undoubtedly the best choice.

Interestingly, the water jacket itself is also a type of heat exchanger (though not a plate one). It transfers energy from the firebox to the water circulating in the system. As a result, heat is distributed throughout the building, making the fireplace insert not only a decorative element but also a practical and economical heat source.

What is a water fireplace insert - and how does it work?

A water-jacket fireplace insert is a more modern type of firebox that combines aesthetics and functionality. It consists of an enclosure and a jacket where water circulates, heated during combustion. Its operation is based on transferring heat energy from the firebox to the water, which is then distributed throughout the home via pipes and pumps. In practice, this means that a fireplace can effectively serve as central heating.

During wood combustion, the water in the jacket heats up. Then, thanks to a well-designed system, the hot water is transported to radiators or other heating system components. This allows the water fireplace not only to heat interiors but also to become a key element of the heating system, significantly reducing heating costs.

Odpływ liniowy AZTEK 60cm

NT Ba-12-40

89,99 €

In den Warenkorb

IZ-Ba-12-20

IZ-Ba-12-30

42,99 €

In den Warenkorb

Odpływ liniowy AZTEK 60cm

NT Ba-16-22

109,99 €

In den Warenkorb

The heat exchanger as a connector between open and sealed systems

A heat exchanger plays a crucial role in linking an open system with a sealed-closed one. Its main task is to separate these two systems (without mixing them), enabling safe heat transfer between them. For instance, it can connect a fireplace (open system) to a closed central heating system.

• Safety: In case of a failure in one system, the other remains fully operational.
• Efficiency: The heat exchanger allows effective utilization of thermal energy from the fireplace, reducing heating costs.
• Versatility: It enables the integration of various heating systems.

In practice, a heat exchanger significantly enhances the reliability of the entire installation, and its use opens new possibilities in the field of heating technology. Will the future bring even better ways to integrate systems? One thing is certain – development in this area is not slowing down.

How to choose the right heat exchanger for a fireplace insert?

Choosing the right heat exchanger for a water-jacket fireplace insert is fundamental to the efficiency and safety of the entire heating system. When making a choice, consider the following:

• ✅ Fireplace power – the exchanger should match the device’s power in terms of plate surface (it is recommended that the exchanger has at least 0.30 m² of plate surface per 10 kW of fireplace power).
• Exchanger connections – they should suit the needs of your installation. In modern construction, this is most often 3/4 inch or 1 inch.
• Material – it should be corrosion-resistant and guarantee long device life.

A well-chosen exchanger for the fireplace will not only ensure optimal efficiency but also enhance the durability and reliability of the system. To make the right choice, it is worth consulting experienced specialists who can help make an informed decision tailored to individual needs.

❌ A poorly chosen heat exchanger – especially one that is too small – can cause problems, such as insufficient heating of the closed system or even water boiling in the open system. Therefore, it is essential to focus on getting this right and not simply purchasing the first available exchanger.

Components of a heating system with a fireplace

A heating system with a fireplace is a complex setup in which every component plays a key role. The heat exchanger, expansion vessel, pumps, and valves – all these elements must work together harmoniously to ensure smooth and safe operation. Precise selection and installation of these parts are the foundation of efficient and reliable heating. Without this, the system cannot fulfill its function.

Expansion vessel – function and significance in an open system

The expansion vessel acts as the pressure regulator in an open system. Its main task is to compensate for the increase in water volume as it heats up. This keeps the system pressure at a safe level, ensuring smooth operation. In open systems, where natural water circulation is crucial, the expansion vessel guarantees reliability and safety. It is the unsung hero that maintains the stability of the entire system.

Odpływ liniowy AZTEK 60cm

NT Ba-16-24

114,99 €

In den Warenkorb

Odpływ liniowy AZTEK 60cm

NT Ba-16-32

129,99 €

In den Warenkorb

Odpływ liniowy AZTEK 60cm

NT Ba-16-40

149,99 €

In den Warenkorb

Installation and connection diagrams for a fireplace using a plate heat exchanger

Installing a water-jacket fireplace is a process that requires precision and attention to detail. Only then can the efficiency and safety of the entire heating system be ensured. A crucial step is the proper connection of the fireplace through a plate heat exchanger. In this context, connection diagrams serve as a roadmap, showing how all components should work together for the system to operate flawlessly.

How to connect a water-jacket fireplace to sealed system?

Below is a simplified conceptual diagram illustrating how to connect a water-jacket fireplace to a sealed system. As we already know, the fireplace itself remains in an open system. Both systems are linked via a plate heat exchanger, to which the fluids from both systems are connected in a counterflow manner to improve heat exchange:

Installation diagram with a heat exchanger

The installation diagram with a heat exchanger, as we can see, is not a ready-made design but rather a simplified conceptual diagram. At the center is the plate heat exchanger, selected for the fireplace with an appropriate plate surface-to-fireplace power ratio (minimum 0.3 m² of plates per 10 kW of the water jacket). To the left of the plate heat exchanger is the short open loop with the fireplace as the heat source. To the right is the closed receiving system (underfloor heating - 4).

Elements of the connection diagram for a fireplace using a heat exchanger:

2. Circulation pumps, one for each system
3. Heat exchanger / PHE
4. Underfloor heating or another heat distribution system (radiators)

It is worth noting that instead of a fireplace, any other heat source adapted to operate in an open system can be used here, such as a coal boiler (or so-called "smokers").

Diagram of connecting a fireplace and a gas boiler via a heat exchanger

The fireplace is most often an additional heat source, so it is difficult to imagine a system in practice where the fireplace is the sole heat source (although it is possible). It is, of course, possible to expand the system with a second heat source operating in a closed system, i.e., on the receiving side of the installation. Let’s assume this is a gas boiler (though it can also be another heat source capable of working in a pressurized system). In this case, the boiler operates without the heat exchanger, transferring heat directly to the installation. The heat exchanger serves the same purpose as before – acting as an intermediary in transferring heat from the fireplace to the system.

2. Circulation pumps
3. Heat exchanger connecting the systems
4. Gas boiler (or alternatively another heat source suitable for a closed system, e.g., an electric boiler)
5. Underfloor heating or radiators

What to consider when installing a heat exchanger for a fireplace

Of course, the process starts with selecting the appropriate heat exchanger, as previously mentioned. If the heat exchanger for the fireplace is not chosen correctly, the entire system will not operate optimally. What else should you pay attention to when installing a heat exchanger for a fireplace?

• The plate heat exchanger should be installed vertically. In a horizontal position, it may clog or become air-locked.
• The heat exchanger is typically a counterflow device, meaning it should be connected counterflow (the correct fluid flow direction in both channels is indicated in the diagrams above).
• The exchanger should be installed in a location that allows for easy access.
• It should be mounted in a way that protects against vibrations and ensures stability.

It is worth considering mounting kits for heat exchangers, which simplify the installation process significantly:

Odpływ liniowy AZTEK 60cm

WSP3/4"

99,99 €

In den Warenkorb

Odpływ liniowy AZTEK 60cm

WSP1"

119,99 €

In den Warenkorb

Odpływ liniowy AZTEK 60cm

WSP5/4

149,99 €

In den Warenkorb

The most common installation mistakes and how to avoid them

• ☑️✅ Detailed installation guide for the heat exchanger - mistakes to avoid

When installing a water-jacket fireplace, errors can occur that negatively impact the performance of the heat exchanger and the entire heating system. Here are the most common issues and how to prevent them:

• Incorrect selection of the heat exchanger – leads to inefficient heat transfer and an increased risk of failure. Choosing the right equipment is essential.
• Improper connection of installation components – results in leaks and reduced system efficiency. Always follow the installation instructions carefully.
• Incorrect heat exchanger connection – usually forgetting the counterflow principle or installing the exchanger horizontally, which causes airlocks.

Investing in proven solutions and regular system maintenance is key to long-term, trouble-free operation. It simply pays off.

Odpływ liniowy AZTEK 60cm

NT Ba-23-20

89,99 €

In den Warenkorb

d

NT Ba-23-30

104,99 €

In den Warenkorb

r

NT Ba-23-40

134,99 €

In den Warenkorb

How to ensure proper operation of the heat exchanger?

For a heat exchanger to function flawlessly, regular cleaning and maintenance, for example, every one or two years, is crucial. This component is responsible for effectively transferring thermal energy from the fireplace to the rest of the system. Unfortunately, deposits and contaminants can significantly reduce its efficiency, so it’s essential to remove them systematically. Additionally, checking the tightness of connections and the technical condition of the exchanger is an absolute must. This way, you can detect potential problems early and avoid costly repairs in the future. Prevention is better than cure, right?

Tips for those planning an installation

If you are planning to install a water-jacket fireplace, it’s worth paying attention to a few key aspects that will affect the efficiency and safety of the entire system. Here are the most important tips:

• Selection of installation components – carefully choose components such as the heat exchanger, which plays a crucial role in the proper functioning of the system. All elements must be compatible and meet technical requirements.
• Precise planning – connecting a fireplace to an open system via a heat exchanger requires careful planning and the use of appropriate safeguards to ensure safe and efficient system operation.
• Regular maintenance – remember to perform systematic technical inspections and maintenance to maintain high efficiency and reliability of the heating system.

By following these steps, you will not only save money but also gain peace of mind and comfort. After all, safety and convenience are priceless.

Odpływ liniowy AZTEK 60cm

NT Ba-32-20

134,99 €

In den Warenkorb

32 30

NT Ba-32-30

164,99 €

In den Warenkorb

p

NT Ba-32-40

199,99 €

In den Warenkorb