Open vented and sealed heating systems in central heating - the differences

✅ Open and Sealed Heating Systems - Key Differences

When undergoing a major heating renovation or building a new home, we often encounter the terms open and sealed central heating systems. It's important to understand what they mean and how they differ. Generally, there are two basic categories used in Europe and around the world for central heating systems - open and sealed systems. Knowing the basic differences between them is valuable.

☑️ Open and sealed systems in central heating are the two fundamental types of heating systems. There are essentially no other types in practical use.

Both types of central heating systems differ significantly in their characteristics and functionality - so choosing between them is not arbitrary. Each works with specific types of heating appliances and has certain advantages over the other, or in some aspects, disadvantages. Sealed systems are generally considered more modern, but this doesn't mean they are always applicable. In this article, we'll explore and discuss in detail the main differences between open and sealed systems in central heating.

Open Central Heating System - What does this heating system entail?

An open vented central heating system operates in such a way that it is not completely sealed - it must have a point where it comes into contact with the air. The hot water that heats our radiators and warms our homes circulates through a system of pipes, typically culminating at its highest point (often in the attic or loft) with an open-type expansion vessel. This vessel is a simple device, resembling a bucket in construction (though it can be of any shape), with a lid. When the water in the open central heating system is heated (usually by a boiler, fireplace, etc.), the pressure in the system increases, causing the lid of the expansion vessel to rise. This allows the system to oxidize - maintaining contact with air, which is crucial.

Advantages of an open central heating system

It's often heard that open systems are outdated and that modern heating systems should be sealed. It's hard to disagree with this thesis; however, in some cases, open central heating systems have their advantages. They may not necessarily outweigh the disadvantages, but it's worth mentioning the benefits of an open system.

sprzęgło czarne na 2

SCZ-2ob

249,99 €

Dodaj do koszyka

Sprz Hyd + zeg

SNT-A-70

109,99 €

Dodaj do koszyka

SPRZĘGŁO na 6

SNT25

99,99 €

Dodaj do koszyka

Gravitational System in Open Heating System - No Circulation Pump

✅ Firstly, an open heating system allows for gravitational operation, which basically does not work in modern closed CH systems that require circulation pumps. The gravitational system operates based on pressure variations in different parts of the heating system - thus, water begins to circulate naturally as the heating is activated (in simplified terms, when we start the heating boiler or light a fireplace). The absence of a need for a circulation pump represents some savings (a good CH pump costs several hundred złoty), but the real savings come from the fact that the circulation pump does not consume electricity over the years.

Some heating devices should operate precisely in an open vented system

Heating devices, considered more primitive in their construction, more inert - are often designed for an open system. These are often fireplaces with a water jacket, but also old-fashioned boilers - e.g. coal-fired, solid fuel, wood-burning, so-called "junk". Most of these devices do not have automation that turns off the device when the house is heated. Usually, they continue to heat our house until the fuel runs out - e.g. when the wood in the fireplace or combustion chamber runs out.

Since these devices do not turn off - they can lead to overheating of the CH system and dangerous pressure increase in the pipes. Pressure, underestimated by laymen - could even burst these pipes. Therefore, installing old boilers in closed systems - is downright dangerous.

✅ An open CH system has the advantage that in the event of overheating of the system and pressure increase - it will open the expansion vessel causing an automatic pressure drop in the installation and draining some water into the sewage system. Some of the water also simply evaporates through the open expansion vessel. This will save our system from damage.

Drawbacks of an open system in a central heating system

☑️ Unfortunately, the drawbacks of open systems are quite significant and basically often disqualify them from modern heating systems.

Although some devices can only operate in an open system - unfortunately, the drawbacks of an open system in a central heating system are so significant that they outweigh the advantages. Over the years, it is increasingly difficult to find its advocates among installers of heating devices, and further use of open systems often results from necessity (e.g. we have a heating boiler that requires it).

Below we will discuss the specific drawbacks of open CH systems.

Air ingress into CH means greater potential for scale deposits and corrosion

The fact that in an open system water has access to air has a beneficial effect on protecting the CH system from excessive pressure buildup - but it is also the main reason why open systems are considered more harmful. Water evaporation from the system requires water to be supplied. As we know, water containing certain minerals (mainly magnesium and calcium) causes scale deposition in the boiler. Scale is a huge problem affecting the efficiency of heating systems. Old, scaled-up CH systems in extreme cases can increase the amount of fuel needed to heat the house - even by 60% (of course, we are talking about scale deposits after many years).

➡️ The potential for boiler scale is not the only problem, air ingress into water also causes a corrosive potential for devices in the system, radiators, heat exchangers, boilers - leading to a faster need for their replacement and generally speaking - contamination of the installation. Comparing the cleanliness and efficiency of closed and open systems - e.g. after 5 or 10 years - always turns decisively in favor of closed systems, which maintain relative cleanliness.

Manufacturers of modern boilers and heat pumps may not honor the warranty in an open system

✅ For the above reasons - the potential harm of open systems - manufacturers of modern heating devices, equipped with automation, such as condensing boilers (gas) or heat pumps - generally do not honor the warranty if you use the device in an open system. The manufacturer usually informs in which system their supplied system should be installed.

An open system is not suitable for underfloor heating

Underfloor heating consists of thin pipes, so the hygiene of such an installation is very important. Maintaining underfloor heating in a system that carries regular scale deposits over time would result in some heating circuits becoming non-functional. This would essentially prevent the underfloor heating from working effectively - and this cannot be effectively repaired other than by tearing up the floor, scraping off the screed, and laying new pipes.

Underfloor Heating Manifold NORDIC TEC - 5 circuits

DE-RD-CO-5

115,99 €

Dodaj do koszyka

Underfloor Heating Manifold NORDIC TEC - 6 circuits

RD-CO-6

125,99 €

Dodaj do koszyka

Underfloor Heating Manifold NORDIC TEC - 7 circuits

RD-CO-7

141,99 €

Dodaj do koszyka

Sealed Central Heating (CH) System - What Is It and How Does It Work?

☑️ What are the basic differences between a sealed and an open vented system?

A sealed CH system is the opposite of an open system. It also must have the ability to neutralize excessive pressure in case of system overheating - however, these are sealed expansion vessels. They may not be as effective as open overflow vessels, but - to put it simply - they don't need to be as effective. A sealed CH system is designed to work with modern heating devices equipped with temperature sensors that shut down the system to protect it from overheating. Therefore, inert heating boilers or fireplaces should not operate in a sealed system, but rather in an open one.

Advantages of a Sealed System

✅ Hygiene of a sealed heating system

The primary advantage of a sealed system is the absence of harmful corrosion potential and boiler scale deposits. Water in regions with high water hardness has the potential to generate scale due to its physico-chemical structure. However, in a sealed system, water does not come into contact with air and thus does not evaporate. In such a scenario, new water is rarely introduced into the system; it remains the same water. After the initial calcium deposition, it cannot generate more scale deposits, making the sealed system healthier for the CH system overall.

A sealed system can work with both radiators and underfloor heating

As mentioned, an open system is not recommended for underfloor heating. A sealed system, due to the lack of real potential to clog the thin pipes of underfloor heating, can be used with both underfloor heating and radiators. Therefore, it is undoubtedly much more functional.

Sealed system - the only alternative for modern gas boilers and heat pumps

✅ Heat pumps and condensing boilers operate in a sealed system, not an open one

In fact, there are hardly any manufacturers of gas boilers or heat pumps that allow their devices to be used in open systems. In a sealed system, the environment is very safe - thus, it is absolutely the only solution if you want to install a heat pump or modern gas boiler. There may be very few exceptions to this rule, but as a rule of thumb, these devices are not installed in open systems, only sealed ones.

Disadvantages of a sealed central heating system

✅ The disadvantages of a sealed system are definitely fewer than the advantages.

Unfortunately, a sealed central heating system also has some drawbacks:

• ➡️ The protection of sealed CH systems against system overheating and dangerous pressure increases is based on pressure-type sealed expansion vessels and air vents, which may, however, provide insufficient protection for inert heating devices - e.g., coal boilers, and often also fireplaces with a water jacket.

✅ Therefore, if you want to have a "healthier" and "cleaner" sealed system in your home, you won't connect a coal boiler or so-called "junk" directly to it (there are ways to connect a sealed and open system in one system - through a plate heat exchanger - but more on that later).

Ba-12-40

NT Ba-12-40

89,99 €

Dodaj do koszyka

Ba-12-50

NT Ba-12-50

104,99 €

Dodaj do koszyka

Ba-12-60

NT Ba-12-60

114,99 €

Dodaj do koszyka

Sealed System with Circulating Pump - Not a Gravity System

• ➡️ Another disadvantage of a sealed system is that it's unlikely to work efficiently with gravity-fed systems operating on thinner pipes - hence, a circulating pump will definitely be needed. Due to its design, water won't circulate effectively based on gravity alone, and we strongly advise against such experiments. We must accept the presence of a pump and the electricity it consumes as the price of modern heating.

Open System with Pump - With or Without?

We mentioned that gravity-fed operation is possible in open CH systems. However, it's neither a requirement nor a recommendation. Systems without pumps (definitely not recommended for sealed models) can manage in specific conditions and were once the norm. However, it's not always the case that they will function efficiently if we opt for an open system. This depends, for example, on the size of our CH system (i.e., the extent of the building) and whether it's a multi-story building.

In our opinion, if you do choose an open vessel system, we recommend one with a pump. This setup will be much more efficient and there's a chance of avoiding underheated rooms. Gravity systems are an unattainable dream but also somewhat utopian when it comes to larger homes. An open system with a pump, if you opt not to seal the system, is a realistic and generally better solution.

Can You Have Both an Open and a Sealed System in One Home CH?

Yes, technically it's possible to have both an open and sealed system within one building. Moreover, this isn't a strange or extravagant solution but rather commonly used during the renovation of old houses. Typically, in new home installations, we tend to opt for heat pumps, gas boilers, energy-efficient electric boilers, modern pellet boilers - hence, we immediately opt for a sealed system, especially conducive to underfloor heating projects.

Conversely, older buildings generally originally had open CH systems - that's just how things were done back then. Hence, nuances arise, especially when wanting both a coal boiler and, for example, a gas boiler in one house. Or when wanting both a fireplace and a heat pump.

Examples of Situations Combining Sealed and Open Systems in One Building

• ➡️ Gas boiler for an old house with an open installation - We have a house with an old open CH system with radiators. Financially, we can't afford to replace the entire CH, which would be expensive, but we want to connect a gas boiler. Therefore, we create a small sealed system for it - providing a safe environment from the perspective of condensing boilers - and leave the entire CH renovation for future years.
  ✅ To connect both systems (to allow heat from the sealed system to pass to the open household installation), plate heat exchangers are used for gas boilers.
• ➡️ Connecting a coal boiler to an open installation - We have a house where we've replaced the entire system with a new sealed installation. It's heated by some modern device like a heat pump, electric or gas boiler. However, the thought of a harsh winter keeps us from discarding the old coal boiler. In such cases, we create a small part of an open CH system for it.
  ✅ To connect an old-type coal boiler or wood boiler to a new sealed installation, a plate heat exchanger for heating boilers is used.
• ➡️ Connecting a heat pump to an old open installation - Regardless of whether a heat pump should be installed in an old house, it does happen. To protect the heat pump from the harmful effects of a contaminated installation, we create a sealed CH circuit, which we connect to the main part of the system.
  ✅ In such cases, heat pumps are connected using plate heat exchangers for heat pumps.
• ➡️ Connecting a fireplace to an underfloor heating system - As we remember, underfloor heating should operate in a sealed CH system, while a fireplace is still a relatively inert heat source, often installed according to recommendations in an open system.
  ✅ To connect a fireplace with a water jacket to a sealed underfloor heating system, a suitably selected plate heat exchanger for fireplaces is used.

Certainly, there are many potential examples, but essentially, the scheme for combining sealed and open systems is usually similar or almost the same. Thanks to heat exchangers, devices that are quite inexpensive (unless it's a heat pump exchanger), we can have both systems, each with its own heat source.

Which System Is Better? Open or Sealed?

Definitely, a sealed system is better and shows significantly less harm to the entire CH system. It remains healthy for many years and doesn't tend to degrade with each season by collecting larger amounts of dirt and scale. It doesn't cause a drastic increase in fuel consumption or electricity as it ages.

However, this isn't a matter of free choice - whether you choose an open or sealed system - it actually depends on the heat source that will heat your home. It's not excluded that there will be two heat sources that will require both systems within one house.

Ba-60-50

NT Ba-60-50

449,99 €

Dodaj do koszyka

Ba-60-60

NT Ba-60-60

499,99 €

Dodaj do koszyka

Wall-Mounting set for Plate Heat Exchanger - 1"

WSP1"

119,99 €

Dodaj do koszyka