Shower Drain RAIN 60-100cm

The complete shower drain with RAIN cover includes:

- steel linear drain (the water channel)
- grille of 1.5mm thickness, much thicker than most manufacturers (who offer 1.2mm or 1mm thickness)
- low steel siphon for water with a steel (not plastic) sedimentation and full equipment with a DN40 exit, the installation height of the siphon (from the bottom to the flange) is only 52mm
- additional PVC pipe - DN40/50
- leveled steel feet for proper drain setting (avoid plastic feet!)
- waterproof membrane necessary for proper installation and subsequent use

Technical details:

• Width of the drain (the part which is visible after the instllation in the bathroom) - 7cm
• Length - 60, 70, 80, 90 or 100 cm
• Material: Stainless Steel AISI304 (for the use inside)
• Grille made of scratch-resistant hardened steel with 1.5 mm thick damping spacers (enabling silent use)
• Steel siphon with an installation depth of 52mm (measured to the flange), full dimensions on the technical drawing presented below
• The drain is surrounded by a steel mounting flange, which makes it easier to cover the drain with a tile or a tile