Nordic Tec LOW LOSS HEADER Hydraulic Separation - Manifold 3 circuits with temperature and pressure control
✅ The set for pumps of 130mm
The steel hydraulic sepration system - Low loss header combined with the flow distibutor - 3 circuit manifold. The system gives better possibilities than a traditional hydraulic separators or separation systems. The steel manifolds (collectors) increase the hydraulic separation - making a neutral pressure zone larger and giving the opportunity to divide a central heating for 3 independent circuits,
- Wall-mounting plate for quick installation, the set includes the wall-mounting pegs too.
- Connections in a size of 1" - factory equipped with a nut and a 25mm PEX adapter
- Hydraulic Separation power - up to 70 kW with a temperature difference of 15K, whereas the entire set with manifolds can handle 95 kW
- Drain valve and automatic air vent in the set
- Accessories connections (air vent and drain valve) - 1/2" - internal threads
- Max. allowable flow rate - 6.00 m3 / h
- Work temperature - max. <95 °C
- Can work with glycol/water mix too - recommended concentration < 50%
- Hydraulic Separator-Manifold - distributor collectors are made of stainless steel S304. Mirror steel look
- Designed for use with 3 standard ✅ 130mm circulation pumps
The dimension of the mounting board / plate of this low loss header is 67 x 50 cm
☑️ Fast delivery to most European countries - just in few days.
✅ Free shipment of the low loss header in the following countries: FR, ES, IT, AT, DE, NL, BE, DK, PL, CZ, LT, LV, SI, EE
