Gas-water heat exchanger - 44 kW evaporator
Gas toWater Plate Heat Exchanger for Heat Pumps or Air Conditioners, for Larger Units in the Range of 30-44 kW
Insulation jacket for the heat exchanger is an optional accessory of the gas to liquid heat exchanger. You can order optionally with this accessory, using the menu above the price.
Technical details:
- Plates made of Stainless steel 316L, welded - brazed with 99,99 Cu (Copper weldings, vacuum brazzing)
- Heating capacity for heat pump / air conditioner / refrigeration unit: 30 kW - 44 kW
- Refrigerant/gas connections: ϕ22 - 7/8" for brazing
- Water (Liquid) connections: 1" - DN 25
- Operating pressure: up to 45 bar
- Pressure test before commissioning: > 60 bar
- Flow rate: 22 m3/h / 22 000 l/h
- Connection: Counterflow suggested for achieving the highest heat transfer capacity
Heat transfer surface area of the Ba-68-60-F heat exchanger - 4.1 m²
The surface of stainless steel plates providing the heat transfer between gas and liquid
The Ba-68-60-F heat exchanger is the largest heat exchanger for heat pumps (in the freon-liquid system) in the Nordic Tec catalog. It is a 60-plate model with a surface area exceeding 4m². This impressive parameter allows for the use of this heat exchanger in fairly large heat pumps or units/air conditioners, even up to 44 kW.
The Ba-68-60-F heat exchanger can be purchased without insulation (in the basic version) or as an enhanced version - an insulated heat exchanger.
Dimensions:
(A) - 526 mm
(B) - 119 mm
(F) - 150 mm
(C) - 470 mm
(D) - 63 mm
