Plate Heat Exchanger NORDIC Ba-27-20 1 1/4" 125kW

Heat Exchanger with 5/4" for home heating systems Nordic Tec Ba-27-20

Heat Exchanger with 4x 1 1/4", 20 plates

Technical details:

- Stainless Steel S316L, brazed with 99,9% Cu

- Connections: 4x 5/4", BSP

- Working Pressure - <30 bar

- Test Pressure - 45-60 bar

- Max. temperature +230°C

- Flowrate - 12 m³/h

- Heat Exchange Surface - 0.540 m²

Dimensions:

(A) - 286 mm
(B) - 116 mm
(F) - 55 mm
(C) - 234 mm
(D) - 63 mm

In DOWNLOAD section you get the data sheet of the unit.

________________

Application of the 20-Plate Heat Exchanger 1 1/4":

20-plate heat exchanger 5/4" in terms of construction is distinguished by a large diameter of connections in relation to the heat transfer area, which means that it can be predestined to systems that require greater flows with as lower pressure drop as possible. An example of such installations may be old central heating systems based on thicker pipes, where installing a 1-inch heat exchanger would mean a significant narrowing of the system.
The Plate Heat Exchanger Ba -27-20 model, apart from the above, can work with virtually any traditional heat source - it can be both a fireplace water jacket, a boiler for traditional fuel (coal, wood) and a boiler for a more modern fuel - such as, for example, a stove working in a closed system on pellets or condensing boiler.

From a theoretical point of view, this heat exchanger could also work with Heat Pumps - while the contraindication will be an insufficient heating exchange surface, because we must remember that HP require quite meticulous selection of the exchanger so that it can work efficiently and on low energy consumption.

________________

Check as well our other plate heat exchangers with threads 1 1/4". similar to this item:

• Plate Heat Exchanger Ba-27-30 1 1/4"
• Plate Heat Exchanger Ba-27-40 1 1/4"