Open Expansion Tank: A Comprehensive Guide

How does an open expansion tank work?

An open expansion tank acts as a safety buffer in open heating systems. It absorbs excess pressure, allowing the entire system to operate stably and without disruptions. Without it, we risk serious failures that can not only cause stress but also lead to high repair costs. This device is not just a part of the system – it is its foundation. It is essentially a requirement if your central heating operates in a so-called open vented system.

What is an open expansion tank?

An open expansion tank is a key component of any open central heating system, especially in systems with solid fuel boilers. Its primary function is to prevent dangerous pressure increases, which can occur when the water in the system overheats or boils (solid fuel boilers are relatively inert and such risks exist, unlike modern heat sources like heat pumps or condensing boilers, which cut off power when the temperature becomes too high, thanks to sensors). Positioned at the highest point of the heating circuit, the tank acts as a buffer, absorbing excess pressure. This ensures the system operates stably, providing safety and peace of mind for the user.

Definition and application in heating systems

In central heating systems, an open expansion tank plays a critical role as a safety guardian. When the water temperature in the system rises, it allows excess pressure to be released, protecting the system from potential damage. Its design, though simple, is extremely effective, making it an indispensable component in systems with solid fuel boilers. Thanks to this, the heating system operates efficiently and without disruptions, even under challenging conditions.

• ☑️✅BLOG: How to connect gas boilers to an open system with an open expansion tank?

Differences between open and closed expansion tanks

Open or closed? This question often arises when choosing the right expansion tank. Below are the key differences between these two types:

__________

__________

An open expansion tank, due to its simpler construction, is an ideal solution for systems with solid fuel boilers. Its main task is to protect against pressure increases, making it an indispensable component in such installations. On the other hand, a closed expansion tank is used in more advanced systems but comes with higher installation costs.

Ba-32-20

NT Ba-32-20

134,99 €

Dodaj do koszyka

Ba-32-30

NT Ba-32-30

164,99 €

Dodaj do koszyka

Ba-32-50

NT Ba-32-50

239,99 €

Dodaj do koszyka

Operating principle of an open expansion tank

An open expansion tank is a key element of any vented heating system, especially in systems with solid fuel boilers. Its primary function is to protect the system from overheating, which could lead to dangerous pressure increases. It can be compared to a buffer – absorbing excess pressure, ensuring the stability and safety of the entire system.

In practice, this tank is installed at the highest point of the heating circuit. Why? Because it is precisely at this point that it manages pressure most effectively, which is crucial for the reliable and efficient operation of the system. Its presence in the installation is not just a recommendation but a necessity. Without it, the risk of failure increases, and the system's durability decreases.

How does an expansion tank protect the system from overheating and boiling water?

An open expansion tank plays a crucial role in protecting the heating system from overheating and boiling water. When the water temperature in the central heating system exceeds safe levels, this tank releases excess steam. In doing so, it effectively prevents pressure increases that could damage the system.

Overheating of water in the system poses a serious threat to both its efficiency and safety. The expansion tank acts as the system’s guardian. When necessary, it releases excess pressure, protecting the installation from failures. Even in cases of water boiling, the system remains stable and safe. This significantly improves its reliability and extends the lifespan of the entire installation.

• ℹ️ BLOG: How to separate a heat pump from an old system with an open expansion tank?

The role of pressure in a heating system

Pressure in a heating system is one of the key parameters that require precise control. Without proper pressure management, the system cannot operate safely or efficiently. This is where the open expansion tank plays its indispensable role, enabling the regulation of pressure in the central heating system.

Thanks to its design, the expansion tank allows for the free flow of water and steam. This helps maintain an optimal pressure level, even with sudden temperature changes. As a result, the risk of damage and failures is minimized. The heating system operates not only safely but also efficiently, ensuring its long-lasting and reliable performance.

Ba-16-34

NT Ba-16-34

134,99 €

Dodaj do koszyka

Ba-16-40

NT Ba-16-40

149,99 €

Dodaj do koszyka

Ba-16-50

NT Ba-16-50

169,99 €

Dodaj do koszyka

Key components of an open expansion tank

An open expansion tank is a key element of any non-pressurized heating system. Its proper functioning depends on several essential components, the most important of which is the riser pipe. This pipe plays a fundamental role in maintaining the stability of the entire system. Without it, the system could quickly lose balance, leading to serious issues.
The riser pipe and its function

The riser pipe is an indispensable element of any heating installation. Its main task is to connect the solid fuel boiler with the open expansion tank, allowing the transport of excess steam to the tank. This effectively controls the pressure in the system, preventing potential damage. It can be compared to a safety valve in a hydraulic system – always ready to protect the installation from overload. This simple yet crucial solution ensures the safety of the entire system.

The overflow pipe – removing excess steam

The overflow pipe is another key component of the open expansion tank, serving as an additional safety feature. Its primary function is to remove excess steam from the expansion tank to the drainage system. This protects the heating system from dangerous pressure increases that could lead to costly failures. It can be likened to an emergency system in a car – it acts in critical moments, protecting the key components of the installation. This simple solution has invaluable significance for system safety.

• ✅☑️ BLOG: How to integrate a solid fuel boiler with an open expansion tank and a pressurized system?

Installation of an open expansion tank

Connecting the expansion tank is a critical stage in the installation of a heating system. It requires not only precision but also a full understanding of its function. An open expansion tank acts as a buffer that absorbs excess pressure, ensuring the stability and safety of the entire system. To effectively discharge excess steam, installing this component at the highest point of the heating circuit is not merely a recommendation – it is an absolute necessity.

Why is installation at the highest point of the circuit crucial?

The open expansion tank must be installed at the highest point of the heating circuit to function properly. This location allows for efficient discharge of excess steam, which is key to maintaining stable pressure in the system. This is not only a technical requirement but also the foundation of a safe and reliable installation. By doing so, you minimize the risk of failures, and the entire system gains durability.

sprzęgło lustro na 3

SNT-BL-3

314,99 €

Dodaj do koszyka

sprzęgło czarne na 2

SCZ-2ob

249,99 €

Dodaj do koszyka

sprzęgło lustro na 2

SCZ-2ob

264,99 €

Dodaj do koszyka

How to connect an expansion tank – step by step

Connecting an expansion tank requires precision and understanding of its role in the heating system. Below are the steps to help you perform the installation correctly:

1. Choosing the right location: Ensure the tank is installed at the highest point of the heating circuit. This is crucial for its proper operation.
2. Connecting the riser pipe: The riser pipe should be directly connected to the boiler, allowing the transport of excess steam to the expansion tank.
3. Installing the overflow pipe: The overflow pipe must be installed in a way that effectively discharges excess steam from the tank to the drainage system.
4. Checking for leaks: After installation, thoroughly check all connections for leaks. This critical step ensures the system operates correctly and is leak-free.

The process of installing an expansion tank requires attention and precision but is essential for the safety and efficiency of the heating system. Will future technology simplify this process? Perhaps. However, one thing remains certain – a solid installation is the foundation of reliable operation for any heating system.

How to select the right expansion tank for your system?

Choosing the right expansion tank is key to an efficient and safe heating installation. How to do this? First and foremost, consider a few important factors:

1. System size – the larger the system, the larger the tank needed.
2. Boiler type – different boilers require different tank specifications.
3. Specific system needs – for example, additional features such as insulation.

✅ Sounds complicated? Only at first glance – in practice, almost any open tank will fulfill its function if its capacity corresponds to at least 5% of the total capacity of the heating system.

When selecting a tank, you can also consider additional aspects such as:

1. Material – durable and corrosion-resistant.
2. Additional features – for example, insulation to increase efficiency.

When to choose an open tank and when to choose a closed tank?

The choice between an open and a closed expansion tank primarily depends on the specifics of the heating system and the type of boiler powering it. An open expansion tank is a classic solution, particularly valued in systems with solid fuel boilers or fireplaces, and is therefore intended only for open systems. It is not suitable for closed systems, as the purpose of a closed system is to isolate the system from air intake, which this type cannot ensure.

On the other hand, a closed expansion tank, also known as a diaphragm tank, is a modern and technologically advanced solution. It is ideal for installations with gas and oil boilers. Thanks to its design, it provides better protection against uncontrolled pressure increases, making it an excellent choice for modern, automated heating systems. It is like an additional layer of protection that ensures peace of mind and safety in use.

☑️✅ In summary – an open tank is used in open systems, while a closed tank is used in closed, pressurized systems.

We also invite you to check out Nordic Tec's offer for:

1. Plate heat exchangers
2. Central heating distributors
3. UV water filters

UV25W-PH - 25W 6GPM

NT UV 25W-PH

129,99 €

Dodaj do koszyka

UV30W-PH - 30W 8GPM

NT UV 30W-PH

179,99 €

Dodaj do koszyka

UV Water Steriliser NT UV55W-PH - 55W 12GPM

NT UV 55W-PH

234,99 €

Dodaj do koszyka