New products

Stainless steel heating manifold Nordic Tec INOX 12 circuits
  • New
On stock
Stainless Steel UFH Manifolds - Heating Manifolds INOX

Stainless Steel Heating Manifold Nordic Tec INOX 12 circuits

Edelstahl-Verteiler-INOX-12
€184.99
Stainless Steel Manifold Nordic Tec INOX 12 circuits | 12 heating circuits Robust stainless steel heating manifold for supplying 12 independent circuits. The product is supplied as a complete set – with all the components visible in the photos – and is ready for connection in both underfloor heating systems and systems with radiators. Model from the...
Stainless steel heating manifold Nordic Tec INOX 11 circuits
  • New
On stock
Stainless Steel UFH Manifolds - Heating Manifolds INOX

Stainless Steel Heating Manifold Nordic Tec INOX 11 circuits

Edelstahl-Verteiler-INOX-11
€174.99
Stainless Steel Heating Manifold Nordic Tec INOX 11 circuits 11-circuit stainless steel heating manifold. Complete steel manifold set, equipped with all the accessories visible in the photos, for use with underfloor heating or radiators. 11-circuit model from the NORDIC TEC INOX series, screwed together and ready for installation. 11 sections - 11...
Stainless steel heating manifold Nordic Tec INOX 10 circuits
  • New
On stock
Stainless Steel UFH Manifolds - Heating Manifolds INOX

Stainless Steel Heating Manifold Nordic Tec INOX 10 circuits

Edelstahl-Verteiler-INOX-10
€157.99
Stainless Steel Manifold Nordic Tec INOX 10 circuits 10-circuit stainless steel manifold. Complete steel manifold set, equipped with all the accessories visible in the photos, for use with underfloor heating or radiators. 10-circuit model from the NORDIC TEC INOX series, screwed together and ready to install. 10 heating circuits - 10 heating circuits...
Stainless steel heating manifold Nordic Tec INOX 9 circuits
  • New
On stock
Stainless Steel UFH Manifolds - Heating Manifolds INOX

Stainless Steel Heating Manifold Nordic Tec INOX 9 circuits

Edelstahl-Verteiler-INOX-9
€144.99
Stainless Steel Manifold Nordic Tec INOX 9 circuits Stainless steel manifold with 9 heating circuits. Complete set including all the accessories shown in the pictures, suitable for use with both underfloor heating and radiator systems. 9-circuit model from the NORDIC TEC INOX series, pre-assembled with fittings and ready for immediate use. 9 circuits -...
Stainless steel heating manifold Nordic Tec INOX 8 circuits Stainless steel heating manifold Nordic Tec INOX 8 circuits 2
  • New
On stock
Stainless Steel UFH Manifolds - Heating Manifolds INOX

Stainless Steel Heating Manifold Nordic Tec INOX 8 circuits

Edelstahl-Verteiler-INOX-8
€133.99
Stainless Steel Manifold Nordic Tec INOX 8 circuits Stainless steel manifold with 8 circuits made of rust-proof steel. Complete set with all the accessories shown in the photos, for use with underfloor heating or radiators. 8-circuit model from the NORDIC TEC INOX series, screwed together and ready to install. 8 circuits - heating circuits Stainless...
Stainless steel heating manifold Nordic Tec INOX 7 circuits Stainless steel heating manifold Nordic Tec INOX 7 circuits 2
  • New
On stock
Stainless Steel UFH Manifolds - Heating Manifolds INOX

Stainless Steel Heating Manifold Nordic Tec INOX 7 circuits

Edelstahl-Verteiler-INOX-7
€119.99
Stainless Steel Manifold for Central Heating and Underfloor Heating Nordic Tec INOX 7 circuits Stainless steel manifold with 7 circuits, i.e. made of stainless steel, for heating systems and underfloor heating. 7-circuit model from the NORDIC TEC INOX series.Light and easy to install, with complete equipment. 7 circuits - heating circuits Stainless steel...
Stainless steel heating manifold Nordic Tec INOX 6 circuits Stainless steel heating manifold Nordic Tec INOX 6 circuits 2
  • New
On stock
Stainless Steel UFH Manifolds - Heating Manifolds INOX

Stainless Steel Heating Manifold Nordic Tec INOX 6 circuits

Edelstahl-Verteiler-INOX-6
€109.99
Stainless Steel Manifold for Central Heating and Underfloor Heating Nordic Tec INOX 6 circuits Stainless steel manifold for heating systems and underfloor heating. 6-circuit stainless steel model from the NORDIC TEC INOX series. A more affordable and lighter alternative to brass manifolds (also available in our range). 6 circuits - heating circuits Made...
Stainless steel heating manifold Nordic Tec INOX 5 circuits
  • New
On stock
Stainless Steel UFH Manifolds - Heating Manifolds INOX

Stainless Steel Heating Manifold Nordic Tec INOX 5 circuits

Edelstahl-Verteiler-INOX-5
€99.99
Stainless Steel Heating Manifold for Central Heating and Underfloor Heating Nordic Tec INOX – 5 circuits Stainless steel heating manifold for central heating and underfloor heating systems, 5-circuit model from the INOX series (stainless steel). 5 heating circuits / 5 ports Made of stainless steel (INOX) Fully equipped stainless steel heating manifold...
Stainless steel heating manifold Nordic Tec INOX 4 circuits
  • New
On stock
Stainless Steel UFH Manifolds - Heating Manifolds INOX

Stainless Steel Heating Manifold Nordic Tec INOX 4 circuits

Edelstahl-Verteiler-INOX-4
€92.99
Stainless Steel Heating Manifold for Central Heating and Underfloor Heating Nordic Tec INOX – 4 heating circuits Stainless steel heating manifold for central heating & underfloor heating, 4-circuit model from the INOX series, made of stainless steel. 4 heating circuits Made of stainless steel Fully equipped stainless steel manifold Recommended...
Stainless steel heating manifold Nordic Tec INOX 3 circuits
  • New
On stock
Stainless Steel UFH Manifolds - Heating Manifolds INOX

Stainless Steel Heating Manifold Nordic Tec INOX 3 circuits

Edelstahl-Verteiler-INOX-3
€81.99
Stainless Steel Manifold for Central Heating and Underfloor Heating Nordic Tec INOX 3 circuits Heating manifold for central heating and underfloor heating, 3-circuit manifold from the INOX series, stainless steel, rust-proof. 3 circuits Made of stainless steel Fully equipped manifold Recommended pressure up to 5.0 bar, tested at 9 bar Recommended maximum...
Stainless steel heating manifold Nordic Tec INOX 2 circuits
  • New
On stock
Stainless Steel UFH Manifolds - Heating Manifolds INOX

Stainless Steel Heating Manifold Nordic Tec INOX 2 circuits

Edelstahl-Verteiler-INOX-2
€71.99
Stainless Steel Manifold for Central Heating and Underfloor Heating Nordic Tec INOX 2 circuits Heating manifold for central heating and underfloor heating, 2-circuit model from the INOX series, stainless steel, rust-proof. 2 circuits Made of stainless steel Fully equipped manifold Recommended pressure up to 5 bar, tested at 9 bar Recommended maximum...
Additional Stainless Steel Drainage Channel 50cm | NORDIC TEC
  • New
On stock
Drain channels Drainage Systems

Additional Stainless Steel Drainage Channel 50cm | NORDIC TEC

Drain-channel-50cm
€41.00
Additional 50 cm Extension Arm – Channel for Garage Linear Drainage Extension arm for garage linear drainage by Nordic Tec – channel 50 cm long Pressure-resistant drainage channel, also withstands car loads Connecting or end elements included Water collecting slot: 10 mm ☑️ The shorter 50 cm arm lets you adjust the length of the linear drain to within...
Flanged Plate Heat Exchanger 156 plates, 3" flanges Nordic Tec Fa-210-156 Flanged Plate Heat Exchanger 156 plates, 3" flanges Nordic Tec Fa-210-156 2
  • New
On stock
Flanged Plate Heat Exchangers

Flanged Plate Heat Exchanger 156 plates, 3" flanges Nordic Tec Fa-210-156

NT-flanged-heat-exchanger-Fa-210-156-DN80
€5,135.00
Plate heat exchanger Fa-210-156 with 3" connection flanges Nordic Tec heat exchanger with 156 plates and a flange connection, i.e. with a DN80 flange. A heat exchanger with a large plate area of over 32 square metres and high capacity. Details below: Connection flanges: 3" flange PN16 - DN80 according to EN 1092-1, type 01 156 steel plates - stainless...
View
Flanged Plate Heat Exchanger 144 plates, 3" flanges Nordic Tec Fa-210-144 Flanged Plate Heat Exchanger 144 plates, 3" flanges Nordic Tec Fa-210-144 2
  • New
On stock
Flanged Plate Heat Exchangers

Flanged Plate Heat Exchanger 144 plates, 3" flanges Nordic Tec Fa-210-144

NT-flanged-heat-exchanger-Fa-210-144-DN80
€4,870.00
Plate heat exchanger Fa-210-144 with 3" connection flanges Nordic Tec heat exchanger with 144 plates and a flange connection, i.e. with a DN80 flange. A heat exchanger with a large plate area of over 30 square metres and high capacity. Details below: Connection flanges: 3" flange PN16 - DN80 according to EN 1092-1, type 01 144 steel plates - stainless...
View
Flanged Plate Heat Exchanger 132 plates, 3" flanges Nordic Tec Fa-210-132 Flanged Plate Heat Exchanger 132 plates, 3" flanges Nordic Tec Fa-210-132 2
  • New
On stock
Flanged Plate Heat Exchangers

Flanged Plate Heat Exchanger 132 plates, 3" flanges Nordic Tec Fa-210-132

NT-flanged-heat-exchanger-Fa-210-132-DN80
€4,605.00
Plate heat exchanger Fa-210-132 with 3" connection flanges Nordic Tec heat exchanger with 132 plates and a flange connection, i.e. with a DN80 flange. A heat exchanger with a large plate area of over 27 square metres and high capacity. Details below: Connection flanges: 3" flange PN16 - DN80 according to EN 1092-1, type 01 132 steel plates - stainless...
View
Flanged Plate Heat Exchanger 120 plates, 3" flanges Nordic Tec Fa-210-120 Flanged Plate Heat Exchanger 120 plates, 3" flanges Nordic Tec Fa-210-120 2
  • New
On stock
Flanged Plate Heat Exchangers

Flanged Plate Heat Exchanger 120 plates, 3" flanges Nordic Tec Fa-210-120

NT-flanged-heat-exchanger-Fa-210-120-DN80
€4,340.00
Plate heat exchanger Fa-210-120 with 3" connection flanges Nordic Tec heat exchanger with 120 plates and a flange connection, i.e. with a DN80 flange. It is the first heat exchanger with a large plate area of over 25 square metres and high capacity. Details below: Connection flanges: 3" flange PN16 - DN80 according to EN 1092-1, type 01 120 steel plates...
View
Flanged Plate Heat Exchanger 108 plates, 2.5" flanges Nordic Tec Fa-210-108 Flanged Plate Heat Exchanger 108 plates, 2.5" flanges Nordic Tec Fa-210-108 2
  • New
On stock
Flanged Plate Heat Exchangers

Flanged Plate Heat Exchanger 108 plates, 2.5" flanges Nordic Tec Fa-210-108

NT-flanged-heat-exchanger-Fa-210-108
€4,075.00
Plate heat exchanger Fa-210-108 with DN65 flanges - 2 1/2" Nordic Tec heat exchanger with 108 plates and flange connections in size DN65. Details below: Connection flanges: 2.5" PN16 - DN65 according to EN 1092-1, type 01 108 steel plates - stainless steel S316 Connection flange material: S304 Heat transfer area: 22.68 m² Net weight: 110 kg Nominal flow...
View
Flanged Plate Heat Exchanger 94 plates, 2.5" flanges Nordic Tec Fa-210-94 Flanged Plate Heat Exchanger 94 plates, 2.5" flanges Nordic Tec Fa-210-94 2
  • New
On stock
Flanged Plate Heat Exchangers

Flanged Plate Heat Exchanger 94 plates, 2.5" flanges Nordic Tec Fa-210-94

NT-flanged-heat-exchanger-Fa-210-94
€3,758.00
Plate heat exchanger Fa-210-94 with DN65 flanges Nordic Tec heat exchanger with 94 plates and DN65 flange connections. Details below: Flanges: 2.5" PN16 - DN65 according to EN 1092-1, type 01 – installation without reducers or threaded adapters 94 steel plates - stainless steel S316 Heat transfer area: 19.74 m² Nominal flow rate: 120 m³/h Support legs -...
View
Flanged Plate Heat Exchanger 80 plates, 2.5" flanges Nordic Tec Fa-210-80 Flanged Plate Heat Exchanger 80 plates, 2.5" flanges Nordic Tec Fa-210-80 2
  • New
On stock
Flanged Plate Heat Exchangers

Flanged Plate Heat Exchanger 80 plates, 2.5" flanges Nordic Tec Fa-210-80

NT-flanged-heat-exchanger-Fa-210-80
€3,441.00
Plate heat exchanger Fa-210-80 with DN65 flanges Nordic Tec heat exchanger with 80 plates and DN65 flange connections. Key details: Flanges: 2.5" PN16 – DN65 according to EN 1092-1, type 01 – installation without reducers or threaded adapters 80 stainless steel plates – stainless steel S316 Connection flange material: S304 Heat transfer area: 16.8 m²...
View
Flanged Plate Heat Exchanger 64 plates, 2.5" flanges Nordic Tec Fa-210-64 Flanged Plate Heat Exchanger 64 plates, 2.5" flanges Nordic Tec Fa-210-64 2
  • New
On stock
Flanged Plate Heat Exchangers

Flanged Plate Heat Exchanger 64 plates, 2.5" flanges Nordic Tec Fa-210-64

NT-flanged-heat-exchanger-Fa-210-64
€3,171.00
Plate heat exchanger with DN65 flange connections for large boiler rooms and district heating substations Plate heat exchanger with DN65 flange connections. Technical details below: Flanges: 2.5" - DN65 according to EN 1092-1, type 01 – installation without reducers or threaded adapters 64 plates made of stainless steel S316 Connection flange material:...
View
Cookie consent