Freon Heat Exchanger Nordic Tec Ba-68-40-F 2,72m²
Freon-Water Heat Exchanger - Refrigerant Condenser for F-gases - 40 Plates
40-plate Refrigerant-Water Freon-Water Plate Heat Exchanger
Characteristics of the refrigerant exchanger channels:
- Channel I - designed for freon/gas/refrigerant - equipped with solder connections - i.e., tube with a size of ϕ 22 - 7/8".
- Channel II - designed for liquid (water/glycol solution).
Number of plates: 40 pieces
- Heat transfer surface area between water and F-gas: 2.72 m²
- Heat pump/heat unit/air conditioner capacity: 18-28 kW
Operating pressure on the gas side: max. 45 bar
The resistance of refrigerant exchangers to pressures up to 4.5 MPa is a primary feature that sets them apart from conventional liquid-liquid exchangers.
Quick deliveries in whole Europe
Reference: EU-Ba-68-40-F
Condition New
Freon heat exchanger - 28 kW heat pump condensor/evaporator
Gas-Water Plate Heat Exchanger for Heat Pumps or Air Conditioners, for Larger Units in the Range of 18-28 kW
Insulation jacket for the heat exchanger is an optional accessory, the default version doesn't include it.
The insulation selection menu is located just above the price.
Technical details - Heat pump condensor 28 kW:
- Stainless steel 316L, welded brazed with Cu
- Heating capacity for heat pump / air conditioner / refrigeration unit: 18 kW - 24 kW - 28 kW
Parameter - (for 28 kW)
Side 1:F-gas side: R410a; Tcond = 40ºC,
Side 2: Liquid side: Water; T-IN= 32ºC; T-OUT = 37 ºC
- Refrigerant/gas connections: ϕ22 - 7/8" for brazing
- Liquid medium connections: 1" - DN 25
- Operating pressure: up to 45 bar
- Pressure test before commissioning: > 60 bar
- Flow rate: 22 m3/h
- Connection method: counterflow
Heat exchange surface area of the Ba-68-40-F heat exchanger - 2.18 m²
The Ba-68-40 freon-water heat exchanger is one of the larger PHE designed for gas or refrigerant, in the Nordic Tec catalogue in the Ba-68-F (freon) series. With this surface area row ( approximately 2.72 m² ), it provides excellent work with heat pumps or units operating with refrigerants like R410A, R32, R290, R404 etc.
The default version of the 40-plate exchanger Ba-68-40-F is the unit without accessories . However, if you want to improve its performance by adding a heat exchanger insulation.
Dimensions:
(A) - 526 mm
(B) - 119 mm
(F) - 103 mm
(C) - 470 mm
(D) - 63 mm
_________________
53 Items
New
No reviews
You might also like