Freon heat exchanger - 11 kW evaporator
Plate heat exchanger for Freon in heat pumps (as an evaporator - condenser) or refrigeration units and air conditioners.
Heat Exchanger is dedidated for GAS to LIQUID applications.
Technical details:
- Stainless steel 316L, welded brazed with Cu
- Heating capacity for heat pump / air conditioner / refrigeration unit: 7-11 kW
- Refrigerant/gas connections: ϕ22 - 7/8" for brazing
- Liquid medium connections: 1" - DN 25
- Operating pressure: up to 45 bar
- Pressure test before commissioning: > 60 bar
- Flow rate: 22 m3/h
- Connection method: counterflow
Heat exchange surface area of the Ba-68-16-F heat exchanger - 1.088m²
The Ba-68-16 Freon heat exchanger is one of the smaller heat exchangers in the Ba-68 series. With a surface area of 1.088m², it is well-suited for use in units operating on R410a, R32, and similar refrigerants with a capacity of up to 10-11 kW. If you require larger Freon heat exchangers for bigger heat pumps or larger air conditioners, you can review the surface areas offered by other models in this series on the chart above. You can find all Ba-68-F Freon heat exchangers in our store.
The Ba-68-16-F gas heat exchanger can be purchased without or with thermal insulation, which further enhances its performance.
Dimensions:
(A) - 526 mm
(B) - 119 mm
(F) - 46 mm
(C) - 470 mm
(D) - 63 mm
