Gas Heat Exchanger - for Heat Pumps 5 kW
Freon Plate Heat Exchanger for Heat Pump (Designed for Evaporator/Condenser Operation).
This device is suitable for use as a condenser in heat pumps, air conditioning units, and similar systems. The heat exchanger can operate with refrigerants like R404A, R32, and similar ones.
Technical Details:
- Material: Stainless Steel 316L, vacuum-brazed with Cu
- Heating Capacity for Heat Pump / Air Conditioner / Refrigeration Unit: 3-5 kW
- Refrigerant / Gaseous Media Connections: ϕ15 - 5/8" for brazing
- Traditional Liquid Media Connections: 1" - DN 25
- Operating Pressure: Up to 45 bar (this is maximal allowable pressure)
- Pressure Tests before Commissioning: > 60 bar
- Flow Rate: 12 m3/h
- Connection Method: Counterflow
Heat exchange surface area of the Ba-26-F heat exchangers for Freon
As can be seen in the above graph, the 20-plate Ba-26-20-F Freon heat exchanger is the smallest model in the Ba-26 series, which is entirely designed for gas-liquid heat exchange and classified as high-pressure (45 bar or 4.5 MPa). It is the smallest gas heat exchanger in our catalog. It has a plate surface area of 0.52m², which translates to effective compatibility with heat pumps typically rated at 3-5 kW, depending on the input parameters. Similar is the expected capacity of refrigeration units or air conditioners, which can be effectively handled by this model.
If the heat exchange surface area of approximately 0.52m² is too small for your application, please check the larger models in the same series, as shown in the graph above. Among them are the Freon heat exchangers Ba-26-34 with 0.88m², Ba-26-50 with 1.3m², and Ba-26-60 with 1.56m². If these devices are still too small or if you'd like to explore larger heat exchangers with a similar purpose, consider the larger series of Freon heat exchangers - Ba-68-F.
Dimensions:
(A) - 308 mm
(B) - 106 mm
(F) - 60 mm
(C) - 250 mm
(D) - 50 mm
