UV Water Steriliser UV330W-PH 330 W 72 GPM 2"

UV Waterfilter / Water Sterilizer NORDIC TEC UV 330W-PH - full 330W mounting kit

More information:

• Reaction chamber, i.e. a 965mm x ⌀168mm tube of S304 stainless steel

• Model of filaments: TUV 55W G55 T8 - 6 pieces - with a life of about a year of continuous work (8-10 thousand hours)
  This UVC filament is easy to find on the Internet and in larger electrical wholesalers, easy to replace with other brands

• ✅Water connections in size 2"

• ✅ Nominal flow:
  16,8m3/h - to ensure dose UVC 300J/m² - recommended for preventive sterilization
  12,7 m3/h - for dose UVC 400J/m² - recommended for sterilization of drinking water

• Filter permissible pressure - maximum 10 bar
  In most drinking water systems, there are no more than a few bar - the sterilizer is adapted to the common use

• Balast - Power supply with 230V ground cable (for home use), EU plug

• Notification function of burning filament with diodes

🚫 The UV Light should never be activated unless it is safely enclosed within the steel cover (reaction chamber).
Direct exposure to UV rays can pose significant risks to both the eyes and skin.

Other information on UV lamp work in water disinfection system:

• Optimal effectiveness of the UV lamp occurs within the temperature range of 2 to 45 degrees Celsius.
• The recommended upper limit for iron content in water for these devices is 0.3mg/l, which typically allows for the use of our lamps without the need for extensive water pre-treatment.
• Initial transparency of sterilized water is essential, and the presence of mechanical or string filters before the device is recommended.
• UV radiation cannot be "overdosed."
• The lamps can also be used with hard water, although this may affect the lifespan of steel components.