Gas Water Heat Exchanger Nordic Tec Ba-68-60-F
Gas Liquid Heat Exchanger Nordic Tec Ba-26-50-F 1,30m² with insulation
Gas Water Heat Exchanger Nordic Tec Ba-68-60-F
Gas Liquid Heat Exchanger Nordic Tec Ba-26-50-F 1,30m² with insulation

Gas Heat Exchanger Nordic Tec Ba-68-60-F 4,1 m²

Gas to liquid Plate Heat Exchanger - Nordic Tec - 60 Plates

60-plate Gas toi Liquid Plate Heat Exchanger

Characteristics of the refrigerant exchanger channels:

  • Channel I - designed for freon/gas/refrigerant - equipped with solder connections - i.e., tube with a size of ϕ 22 - 7/8".
  • Channel II - designed for liquid (water/glycol solution).

Number of plates: 60 pieces

  • Heat transfer surface area between water and gas: 4.08 m²
  • Heat pump/heat unit/air conditioner capacity: 30-44 kW

Operating pressure on the gas side: max. 45 bar
The resistance of refrigerant exchangers to pressures up to 4.5 MPa is a primary feature that sets them apart from conventional PHE (water to water).

☑️ We deliver to almost every European destination in quite short time
✅ Free delivery in: FR, IT, ES, DE, PL, SI, AT, DK, NL, BE, CZ, LV, EE, LT
Reference: EU-Ba-68-60-F
Condition New
Accessories for PHE
  • Exchanger only (without accesories)
  • With Thermal Insulation
On stock
€549.99
VAT included

 

Gas-water heat exchanger - 44 kW evaporator

Gas to Water Plate Heat Exchanger for Heat Pumps or Air Conditioners, for Larger Units in the Range of 30-44 kW

Insulation jacket for the heat exchanger is an optional accessory of the gas to liquid heat exchanger. You can order optionally with this accessory, using the menu above the price.

☑️✅ Check it too: The Solder Adapters for Gas Heat Exchanger's Connectoctions to SAE Thread

Technical details - Gas-Water HE Ba-68-60-F

  • Plates made of Stainless steel 316L, welded - brazed with 99,99 Cu (Copper weldings, vacuum brazzing)
  • Heating capacity for heat pump / air conditioner / refrigeration unit: 30 kW - 44 kW
  • Refrigerant/gas connections: ϕ22 - 7/8" for brazing
  • Water (Liquid) connections: 1" - DN 25
  • Operating pressure: up to 45 bar
  • Pressure test before commissioning: > 60 bar
  • Flow rate: 22 m3/h / 22 000 l/h
  • Connection: Counterflow suggested for achieving the highest heat transfer capacity

Heat transfer surface area of the Ba-68-60-F heat exchanger - 4.1 m²

The surface of stainless steel plates providing the heat transfer between gas and liquid

Heat exchange surface area of the Ba-68-60-F heat exchanger

The Ba-68-60-F heat exchanger is the largest heat exchanger for heat pumps (in the freon-liquid system) in the Nordic Tec catalog. It is a 60-plate model with a surface area exceeding 4m². This impressive parameter allows for the use of this heat exchanger in fairly large heat pumps or units/air conditioners, even up to 44 kW.

The Ba-68-60-F heat exchanger can be purchased without insulation (in the basic version) or as an enhanced version - an insulated heat exchanger.


Dimensions:
Gas HEat Exchanger Dimensions Ba-68-40-F gas liquid

(A) - 526 mm
(B) - 119 mm
(F) - 150 mm
(C) - 470 mm
(D) - 63 mm

33 Items
New
No reviews

You might also like

Soldering Nipple Adapter for Heat Exchanger: 7/8" Pipe | 3/8" SAE Soldering Nipple Adapter for Heat Exchanger: 7/8" Pipe | 3/8" SAE 2
On stock
Adapters-Solder Nippels - Pipe 7/8" to SAE Thread
Soldering Nipple Adapter for Heat Exchanger: 7/8" Pipe | 5/8" SAE
Solder-nipple-7/8"-to-SAE-5/8"
€18.90
Soldering nipple for a 7/8" pipe with a 5/8" SAE threaded connection Nipple for a 7/8" pipe with a 5/8" SAE threaded connection. The listed price applies to one piece of the nipple. Pipe size for soldering: 7/8" Thread size on the SAE side: 5/8" Nipple's Material: Brass CW617N The 7/8" to 5/8" SAE nipple is compatible with Ba-68-F refrigerant heat...
Product added to wishlist
Cookie consent