R290 Heat Pumps: Eco-Friendly and Efficient Heating Solution

In times when environmental protection is becoming a priority, more and more people are looking for planet-friendly methods to heat their homes. One such solution is R290 heat pumps. These modern devices use a natural refrigerant – propane, which is characterized by a low global warming potential (GWP=3). As a result, R290 heat pumps not only minimize their environmental impact but also offer high energy efficiency. This solution is advertised as an advantage, but are their market advantages confirmed?

Is it worth choosing R290 heat pumps?

R290 heat pumps are not only an eco-friendly choice but also a solid investment for the future in terms of efficiency. Thanks to the use of propane as a refrigerant, these devices achieve impressive energy efficiency, which translates into lower heating costs – when considering operational expenses. In the face of rising energy prices (which are expected to continue increasing), such solutions are becoming not only attractive but essential for many households and businesses. This is a technology that harmoniously combines environmental care with real financial benefits. However, this must be weighed against the initial investment costs.

R290 heat pumps and the future of heating in the context of climate policies

How can R290 heat pumps influence the way we heat our homes in the future? Will their widespread use become a key element of global efforts to reduce greenhouse gas emissions? Or will there be obstacles that slow down the development of this technology? The answers to these questions may determine the direction we take in the fight for a more sustainable future. Certainly, the current stance of the European Commission strongly promotes ecological trends (there is even talk of the need to phase out old refrigerants like R134a) – which would work in favor of R290 heat pumps. However, after the election of Donald Trump (whose administration is skeptical of overly radical climate policies), something has changed in Europe, and the deepening energy crisis has led to signals of a softening approach to zero-emission goals. Certainly, the Green Deal will be somewhat moderated, so R290 as a refrigerant may lose some of its artificial political support, at least to some extent. Will it still gain market share and replace older refrigerants? This will also depend on non-ecological factors – price, availability, and above all, efficiency. In short – profitability.

l

NT Ba-32-60

299,99 €

In den Warenkorb

g

NT Ba-32-50

239,99 €

In den Warenkorb

Odpływ liniowy AZTEK 60cm

WSP1"

119,99 €

In den Warenkorb

What are R290 heat pumps?

R290 heat pumps are modern heating devices that use natural refrigerant R290, i.e., propane. Thanks to its low global warming potential, propane is environmentally friendly, making these pumps an excellent solution for those who care about ecology – but let's be honest – also a favorite of the European Union ruling circles and climate lobbying. For everyone, however, it is important that these devices are characterized by high energy efficiency, which translates into savings in operation.

Why is propane (R290) an eco-friendly refrigerant?

Propane, also known as R290, is a natural hydrocarbon that stands out for its zero ozone depletion potential and low global warming potential. The use of propane in heat pumps not only reduces the emission of harmful gases but also supports the development of technologies aligned with sustainable development principles.

GWP (Global Warming Potential) of R290 – what does a low GWP mean?

✅ One of the most important advantages of R290 is its low GWP, which is only 3. For comparison, the popular refrigerant R410A has a GWP of 2088. Such a low GWP means that R290 has a minimal impact on global warming. This is a conscious choice that has real significance for the environment.

Advantages of R290 heat pumps

R290 heat pumps are gaining increasing recognition primarily because they are characterized by exceptional energy efficiency and low energy consumption. They allow for significant reductions in operational costs. Real savings in the long term are the key advantage of these devices.

High energy efficiency (A+++ class)

The biggest advantage of R290 heat pumps is their extraordinary energy efficiency, which often places them in the highest A+++ class. What does this mean in practice? These devices:

• Consume minimal amounts of energy, resulting in lower electricity bills.
• Provide maximum performance, even in challenging weather conditions.
• Help protect the environment by reducing CO2 emissions.
• Are an excellent choice for those who want to combine ecology with savings.

In summary, R290 heat pumps are an ideal solution for those looking for an efficient and economical way to heat their homes.

copy of Odpływ liniowy AZTEK 60cm

NT Ba-27-90

View

Odpływ liniowy AZTEK 60cm

NT Ba-27-80

399,99 €

In den Warenkorb

Odpływ liniowy AZTEK 60cm

NT Ba-27-70

354,99 €

In den Warenkorb

Types of R290 heat pumps

Choosing the right R290 heat pump is a key step towards energy savings and ensuring daily comfort. Various options are available on the market, such as:

• Air-to-water heat pumps
• Monobloc heat pumps
• High-temperature heat pumps

Each of these types has unique features and applications that should be carefully analyzed before making a purchase decision.

Safety and installation of R290 heat pumps

Safety is a key aspect when installing R290 heat pumps, which use propane as a refrigerant. Due to the flammability of R290 (which is its drawback), it is necessary to follow strict guidelines to ensure safe operation. It is important not only to place the pump correctly but also to eliminate any potential ignition sources in its vicinity. Such actions minimize the risks associated with the properties of R290 and enable efficient and ecological system operation. Safety? It's fundamental.

Safety rules when using propane (R290)

Propane (R290) is a natural and eco-friendly refrigerant that stands out for its high efficiency. However, its flammability requires special caution. To ensure safety:

• These devices should be installed in places with good ventilation.
• Avoid proximity to open flames and other potential ignition sources.
• Ensure proper preparation of the installation site, which increases the system's durability and reliability.

This approach not only protects users but also ensures long-term and safe operation of the devices. It's not worth the risk.

Subsidies and profitability of R290 heat pumps

In the context of national and EU policies, subsidies for R290 heat pumps play a significant role, making these devices more affordable. Programs such as "Clean Air" offer support that significantly reduces purchase costs. Even though economic studies have long confirmed the theory that subsidies, in the long run, tend to increase prices for devices (as artificial stimulation of demand always leads to this).

It is worth considering how subsidy programs can influence the decision to purchase these devices and what long-term benefits they can bring.

Odpływ liniowy AZTEK 60cm

NT Ba-60-60

499,99 €

In den Warenkorb

Odpływ liniowy AZTEK 60cm

NT Ba-60-50

449,99 €

In den Warenkorb

Odpływ liniowy AZTEK 60cm

NT Ba-60-40

379,99 €

In den Warenkorb

Support programs, such as "Clean Air"

One of the most important pillars of promoting ecological heating technologies in Poland is the "Clean Air" program. Thanks to it, the costs of purchasing R290 heat pumps can be reduced, making these devices more accessible to the average user. In the understanding of the authorities, this is meant to be an impulse for energy transformation.

Financial support under the "Clean Air" program takes various forms, such as:

• Grants – non-repayable financial support for the purchase and installation of R290 heat pumps.
• Preferential loans – low-interest loans that facilitate financing the investment.

In times when energy prices are constantly rising, every form of savings becomes particularly important.

Are R290 heat pumps a cost-effective choice?

Investing in R290 heat pumps can prove to be profitable, especially when considering their high efficiency and available subsidies. Thanks to the use of the natural refrigerant R290, these devices offer excellent energy efficiency, which translates into lower operational costs. Combined with support programs such as "Clean Air", the purchase of R290 heat pumps becomes a good alternative.

Moreover, having such a heating system can increase the value of a single-family home (as a property), highlighting its modernity and ecological character. In an era of growing ecological awareness, R290 heat pumps can become a significant asset when selling a home. However, it is worth noting that heat pump sellers will always try to convince you to buy.

☑️✅ It is not true that every home is suitable for heat pump installation. Installing a heat pump in an old house is not always justified, unless after thermal modernization (but sometimes thermal modernization involves such high costs that it calls into question the entire investment in a heat pump). We have already written about this in other articles, which are worth reading if you own a house not built with modern technology and are considering a heat pump. We are not heat pump sellers – and we write honestly about these matters, which distributors of these devices usually won't tell you.

• ☑️BLOG: Heat pump in an old house – does it make economic sense?
• ✅BLOG: Heat pump increases electricity consumption – why?

Selection of heat exchangers for R290 heat pumps

The heat exchanger is, of course, a key component, also in R290 heat pumps, but we must know that there can be two types of heat exchangers here. If we are talking about monobloc heat pumps, installers often decide to fill the pump circuit with glycol to protect it from potential freezing. In this case, the two heat pumps must be separated by a heat exchanger for the heat pump.

copy of o

NT Ba-32-90-PL

View

k

NT Ba-32-80

384,99 €

In den Warenkorb

f

NT Ba-32-70

344,99 €

In den Warenkorb

The selection of such heat exchangers is based on the media being water and glycol. The heat exchanger does not work directly with R290. Such heat exchangers usually require between 1.5 to 3m² of plate surface per 10 kW of heat pump (a calculation that works for NORDIC TEC heat exchangers, not necessarily for other manufacturers). These are quite large surfaces.

Separation of R290 Split heat pumps

In some situations, especially when installing a heat pump in a house with an old, open, potentially contaminated system, we separate the heat pump from the system to protect it. We won't go into whether a heat pump should even be installed under such conditions – in practice, it often is. In such cases, we also separate the heat pump using a plate heat exchanger, which can have a smaller surface area than a glycol heat exchanger, as in the case of a monobloc. Why? Water exchanges heat much more easily than glycol. Therefore, the surface areas can be about 10-15% smaller.

• ☑️✅ BLOG: How are plate heat exchangers selected for heat pumps?

Heat exchanger for R290 – gas-to-water

If it comes to a situation where we are looking for a heat exchanger that could work as a condenser for an R290 heat pump – it must be noted that it cannot be just any heat exchanger. Traditional heat exchangers have a pressure resistance of up to 20-30 bar (too low), and they are not particularly resistant to pressure spikes, which are quite common in this application. An R290 heat exchanger must have a working pressure of at least 45 bar and certification for use with gas. A good choice here are heat exchangers from the Ba-26-F series. They are also suitable for DIY heat pumps made from air conditioners, which, by the way, has become a regular trend in our country.

copy of Odpływ liniowy AZTEK 60cm

Ba-26-20-F

View

copy of Odpływ liniowy AZTEK 60cm

Ba-26-34-F

View

copy of Odpływ liniowy AZTEK 60cm

Ba-26-50-F

View

Comparison of R290 with other refrigerants

Choosing the right refrigerant is key to success if we care about efficiency and ecology in heating systems. Compared to other substances, such as R32, R290 stands out – and for good reason. Also known as propane, it is characterized by a much lower global warming potential, making it more environmentally friendly. In times when caring for the environment is becoming a priority for more and more people, choosing a refrigerant that minimizes the negative impact on the planet is crucial.

R290 vs R32 – which refrigerant to choose?

The choice between R290 and R32 depends on many factors – from individual user expectations to specific device operating conditions. Below are the key differences between these refrigerants:

The final decision should be carefully considered, taking into account both technical aspects and environmental impact. It is worth considering what is more important to us – maximum efficiency or minimizing the carbon footprint.

copy of Odpływ liniowy AZTEK 60cm

wymiennik-freon-Ba-26-70-F

View

copy of I

IZ-Ba-26-50

View

copy of Odpływ liniowy AZTEK 60cm

Ba-68-32-F

View

copy of Odpływ liniowy AZTEK 60cm

Ba-68-40-F

View

copy of Odpływ liniowy AZTEK 60cm

Ba-68-60-F

View

copy of Odpływ liniowy AZTEK 60cm

Ba-68-26-F

View