How to choose a thermostatic valve for a hot water tank?

What is a thermostatic valve for a hot water tank?

A thermostatic valve for a hot water tank is a component of the plumbing system responsible for controlling the water temperature in the tank. Its primary function is to mix hot and cold water in the correct proportions to maintain a stable output water temperature. These valves are commonly used in domestic hot water (DHW) systems and heating installations with a hot water tank.

The construction of a thermostatic valve for a hot water tank includes a body with three connections: one for hot water, one for cold water, and one for mixed water. This is known as a three-way valve. Inside the valve, a thermostatic element reacts to temperature changes, automatically adjusting the proportions of water flow. As a result, the valve effectively maintains the desired temperature settings, ensuring user comfort and safety in the system.

Why should you use a thermostatic valve for a hot water tank?

Using a thermostatic valve for a hot water tank offers many benefits, both in terms of safety and energy efficiency. Here are the main reasons why it is worth considering such a valve:

• Precise temperature control. A three-way valve for a hot water tank automatically regulates the water temperature, ensuring constant and safe operating conditions for the tank. This protects the system from overheating and provides optimal working conditions.
• Energy savings. By maintaining the desired temperature precisely, a thermostatic valve for a hot water tank helps minimize heat losses, which translates into lower energy consumption and reduced heating bills.
• Increased safety. A thermostatic valve for a hot water tank minimizes the risk of scalding from hot water, especially when water temperatures exceed safe limits. This ensures that users can safely use the domestic hot water system.

Thermostatic valves are thus not only practical but also enhance the safety and efficiency of the installation.

What to consider when choosing a thermostatic mixing valve for a hot water tank?

Choosing the right thermostatic mixing valve for a hot water tank is crucial for the effective and safe operation of the entire system. Here are some important aspects to consider when purchasing one:

• Temperature range. Make sure the chosen valve allows for temperature regulation within an appropriate range, typically from 30°C to 60°C. This is important for both user comfort and protecting the system from overheating.
• Operating pressure. The three-way valve for a hot water tank must be suitable for the pressure in your system. Check whether the maximum operating pressure of the valve matches the specifications of the plumbing system in your home or building.
• Material. The durability of the valve largely depends on the material it is made of. Brass valves are the most common and are highly resistant to corrosion and have a long service life.
• Connection size. Select a valve with the appropriate thread connection diameter to fit the pipes in your system. Popular sizes include 1/2" and 3/4".
• Safety features. It is worth checking whether the thermostatic valve for the hot water tank includes additional safety features, such as a maximum temperature lock, which further enhances user safety.
• Compatibility with other components. Check whether the valve comes with suitable fittings to avoid installation problems and the need to purchase additional components.

These factors are key to ensuring the proper functioning of the entire system.

Plate Heat Exchanger NORDIC Ba-23-12 3/4" 55kW

NT Ba-23-12

79,99 €

Přidat do košíku

23-30

NT Ba-23-30

104,99 €

Přidat do košíku

23-50

NT Ba-23-50

154,99 €

Přidat do košíku

Thermostatic valve for a hot water tank – installation instructions

Proper installation of a thermostatic valve for a hot water tank is crucial for ensuring the efficient operation of the system and user safety. Installation should begin with carefully reading the manufacturer’s instructions to ensure that all components are properly matched.

First, check whether the thread diameter of the valve’s connections is compatible with the pipes in your system. It is also important to pay attention to the correct placement of the valve in the system – it should be installed between the hot water tank outlet and the water draw-off points. Connect three inlets: the cold water inlet, the hot water inlet, and the mixed water outlet. Each of these connections must be carefully sealed to prevent leaks.

When installing a mixing valve for a hot water tank, it is recommended to use fittings, often included in the set, to facilitate future valve removal if necessary. After completing the installation, it is essential to set the correct output water temperature. It is recommended to set it to a level that ensures comfortable water use while minimizing the risk of burns.

How to set a thermostatic valve for a hot water tank?

To properly set a thermostatic valve for a hot water tank, start by determining the optimal domestic hot water temperature. The most commonly recommended temperature is approximately 50–55°C, as it provides comfort and minimizes the risk of burns. In some cases, such as for eliminating Legionella bacteria, the temperature may be temporarily raised above 60°C.

The valve is adjusted using a knob or adjustment screw located on the valve body. It is advisable to regularly check whether the valve maintains the correct temperature to ensure the stable and safe operation of the hot water tank.

Does the capacity of the hot water tank affect the choice of a thermostatic valve?

The capacity of the hot water tank does not directly affect the selection of the thermostatic mixing valve model. Key factors include the valve’s flow capacity, operating pressure, and temperature adjustment range. The flow capacity must be appropriately matched to the water flow, which may be linked to greater water demand in the case of larger hot water tanks. However, the tank’s capacity itself is not a decisive parameter when selecting the valve.

copy of g

SNT-BL-3

314,99 €

Přidat do košíku

copy of o

SCZ-2ob

264,99 €

Přidat do košíku

o

SCZ-2ob

249,99 €

Přidat do košíku

What are the types of thermostatic valves for hot water tanks?

Thermostatic valves for hot water tanks are divided into several types, depending on their function and design:

• Mixing valves for hot water tanks – the most popular type, regulating the proportions of hot and cold water to ensure a constant output temperature. These are mainly used in domestic hot water systems.

• Safety valves with a thermostat – protect the system from excessive temperature and pressure increases, preventing system damage.

• Thermostatic valves with a capillary for hot water tanks – equipped with a capillary probe that allows for more precise temperature control in the hot water tank, especially in large installations.

Each type has specific applications, and the choice depends on the individual needs of the heating system.

What is a thermostatic valve with a capillary for a hot water tank?

A thermostatic valve with a capillary for a hot water tank is an advanced type of valve that allows precise control of the temperature in the system. The capillary is a thin tube connected to a probe, which is placed directly in or near the hot water tank. This design enables the valve to react to temperature changes with greater accuracy than standard solutions.

This type of valve is ideal for large installations where precision and temperature stability are critical. It provides not only greater user comfort but also safety by eliminating the risk of overheating water and saving energy.

i

SNT25

99,99 €

Přidat do košíku

d

SNT-A-70

109,99 €

Přidat do košíku

o

Sp50x1

94,99 €

Přidat do košíku